Definitions of some terms and phrases of use in the RAC industry.
As far as is possible happily free from the tiresome and wholly unnecessary burden of jargon, verbosity,
distractions and junk diversions that conspire to wreck almost all Internet searches today. Click
A collection of scientific and technical definitions researched throughout the past 36 year period that Mistral has been serving the HVACR industry.
Researched from various public domain sources including non copyright material in reliable websites, professional bodies and institutions, and from accredited encyclopaedias.
These have relevance to the technology upon which the refrigeration and air conditioning industry depends. The list is by no means complete and is constantly being added to.
If you cannot find an answer or explanation for your query or wish to propose an addition or believe a correction is needed then please contact us using our
||In many cases this collection of definitions also includes their origins. Thus celebrating the lives of the uniquely European engineers, mathematicians, physicists and scientists who worked tirelessly laying down the foundations of science and engineering that shaped the modern world we enjoy living in today.|
Mistral Associates have made every endeavour to ensure accuracy and offers this collection of public domain data in good faith as a philanthropic gesture. However, users are reminded that even with data as seemingly established as units of measurement, with some (SI excepted) there can be differences of opinion as to precision and also of course there is the ever persistent problem of semantics. Mistral Associates therefore cannot and does not accept any liability for the consequences of use of the data shown on this web site. If application of this data is critical then Mistral Associates recommends that a certified source is consulted for verification. If you think you have found an error please give both your peers and Mistral Associates the courtesy of letting us know. Feedback
Word or phrase
- Absolute Pressure
- Absolute Temperature
- Absolute Zero
- Accumulator (in Suction Line)
- Air Boundary Layer
- Air Turning vanes
- Albedo (factor)
- Ambient (air)
- ASHRAE (American Society of Heating, Refrigerating and Air Conditioning Engineers)
- Atmospheric Pressure
- Azeotropic Mixture
- Azimuth (solar)
- Balance Point (in refrigeration system components)
- Ball Valve
- Black body
- Boiling Temperature
- Boyle's Law
- BSP (British Standard Pipe [thread])
- British Thermal Unit (Btu)
- Brownian motion
- Bubble Point
- Calorie (both cal and Cal)
- Capillary Tube
- Celsius temperature scale
- Centigrade temperature scale
- CFC (Chlorofluorocarbon)
- CFM (cubic feet per minute)
- Check Valve
- Chemical potential
- Closed Circuit Refrigeration System
- CO2 Critical Point and Triple Point
- CO2 supply cylinder pressure
- Coanda effect
- Condensing Temperature
- Conductance (thermal)
- Conductivity (thermal)
- Conservation of energy
- Contact thermometry
- Critical Pressure
- Critical Temperature
- Cryogenic AFM
- Current (electric)
- Cycle COP
- Dalton's Law
- Darcy–Weisbach (equation)
- Declination (solar)
- Defrost (system)
- Defrost Timer
- Delta T and Delta TD
- Density (mass)
- Design Conditions SC1, SC2 and SC3
- De-humidification (De-humidifier)
- Dew Point
- Diaphragm Valve
- Differential Pressure
- Diffusivity (thermal)
- Direct Expansion (DX)
- Distributor (for connecting capillary tubes)
- Dry Bulb Temperature
- Dry Nitrogen
- Dual Risers
- Dynamic Pressure
- EC (Electronically Commutated motors)
- Emittance or emissivity
- Endothermic process
- Enthalpy–Entropy chart
- Ester Oil
- Equivalent Length
- Evaporating Temperature
- Exhaust air
- Exothermic process
- Expansion Device (Eg. Expansion Valve)
- Extract air
- Fan Curve
- Fin-Coil Heat Exchanger
- First law of thermodynamics
- Fourier heat equation
- FPS (feet per second)
- Freezing Point
- Frost Heave
- Fuel cell
- Gas constant (universal)
- Gate Valve
- Gauge Pressure
- Glass transition
- Globe Valve
- Grey body
- Halogenated Hydrocarbon
- HCFC Phase-out table
- Heat Capacity
- Heat Exchanger
- Heat Pump
- Heater Mat
- Jan Baptist van Helmont
- HFC (Hydrofluorocarbon)
- High Pressure Switch (HP Switch)
- Homogeneous material
- Horse Power (HP)
- HP/LP Switch
- Imperial (units of measurement)
- Inches of Water (Water Gauge)
- Infrared camera
- Infrared region
- Infrared thermal region
- Jan Ingenhousz
- Insulation (material)
- IOR (Institute of Refrigeration)
- Isotropic material
- K factor
- Kinetic energy
- Kirchhoff's law
- Laminar Flow
- Latent heat
- Liquid Receiver
- Low Pressure Switch (LP Switch)
- Mariotte's Law
- Melting point
- mole (SI unit of measurement)
- Mollier Diagram (or Enthalpy–Entropy chart)
- Montreal Protocol
- Non-contact thermometry
- ODP (Ozone Depletion Potential)
- Ohmic heating
- Ozone Depletion Potential (ODP)
- Pallet Size Standards
- Peltier cell
- Peltier effect
- Phase diagram
- Phase change diagram for CO2
- Planck's radiation law
- Plate Heat Exchanger
- Platinum resistance thermometer
- Pressure Relief Valve
- Pressure Relief Valve - Freezer Rooms
- Joseph Priestley
- Psychrometric Chart
- Pressure (absolute)
- Pressure (differential)
- Pressure (gauge)
- Quench rate
- R744 Critical Point and Triple Point
- R744 (CO2) supply cylinder pressure
- Radiant heat flux
- Receiver (Liquid)
- Refrigeration Load
- Relative Humidity
- Resistance thermometer
- Respiration (of fruit and vegetables)
- Reynolds number
- Running Load
- Saturated vapour pressure
- SC1, SC2 and SC3 Design Conditions
- Scanning thermal microscope
- Second law of thermodynamics
- Seebeck effect
- Sensible heat
- Sensible Heat Ratio (SHR)
- Shell and Tube Heat Exchanger
- SI (le Système international d'unités)
- Sight Glass
- Solar Azimuth
- Solar Declination
- Specific Enthalpy
- Specific Entropy
- Specific Gravity
- Specific heat
- Specific Volume
- Spinning Disc Humidifier
- Standard Design Conditions SC1, SC2 and SC3
- Static Pressure
- Steady state
- Steam Humidifier
- Stepper Motor
- Suction Line
- Suction Line Accumulator
- Suction Pressure Control Switch
- System COP
- Temperature glide
- Thermal conductivity
- Thermal diffusivity
- Thermostatic Expansion Valve (TEV, TXV or TX valve)
- Third law of thermodynamics
- 'Time-on, Temperature-off' (Defrost system)
- Ton (refrigeration)
- Transference (thermal)
- Triple Point of Water (TPW)
- Triple point
- Triple Point of CO2
- Turbulent Flow
- Turning vanes
- Universal Gas Constant
- Vacuum Pump
- Van't Hoff's law
- Vapour Compression Cycle
- Vapour Pressure
- VAV (Variable Air Volume)
- VRF (Variable Refrigerant Flow)
- Water Gauge
- Water properties
- Wet Bulb Thermometer
- White Spot Dry Nitrogen
- Wiedemann-Franz Law
- Wien's displacement equation
- Window Rattler
- Zeroth law of thermodynamics
Absolute pressure is zero-referenced against a perfect vacuum, so it is equal to gauge pressure plus atmospheric pressure.
Absolute temperature - temperature measured on the absolute scale where zero is the absolute zero
Also called the Kelvin temperature scale. Absolute temperature is measured in Kelvins and rarely now degrees Rankine.
Absolute zero is 0 K or 0 °R (-273.15 °C or -459.67 °F).
In thermodynamics, an adiabatic process is one that occurs without transfer of heat or mass of substances between a thermodynamic system and its surroundings. In an adiabatic process, energy is transferred to the surroundings only as work.
Absolute zero - zero Kelvin (0 K), temperature at which atomic motion stops. For some special systems and specific definitions of temperature, it is possible to obtain a negative temperature. A system with a negative temperature is not colder than absolute zero but rather it is, in a sense, hotter than infinite temperature.
Absolute zero is 0 K or 0 °R (-273.15 °C or -459.67 °F).
Air boundary layer
Air boundary layer is used to describe the phenomenon that materials 'entrain' a shallow region of air close to their surfaces. Although on exposed construction materials, prevailing winds will disturb this layer (changing airflow pattern from laminar flow to turbulent flow) it is nonetheless important to consider its beneficial insulating effects, particularly when materials with intrinsically high heat transfer coefficients (poor thermal insulators) are under consideration. That it always occurs is a certainty, it is however often ignored because it has little effect when included in calculations involving well insulated composite material walls and because of the extra complex work involved in manual calculations. With the advent of advanced computer programs however there can be no excuse for not including these calculations.
Albedo is the diffuse reflectivity or reflecting power of a surface.
It is the ratio of reflected radiation from the surface to incident radiation upon it. Its dimensionless nature lets it be expressed as a percentage and is measured on a scale from zero for no reflection of a perfectly black surface to 1 for perfect reflection of a white surface.
Since it is the ratio of all reflected radiation to incident radiation it will include the diffuse and the specular radiation reflected. It is, however, common to assume a surface reflects in either a totally specular manner or a totally diffuse manner, as this can simplify calculations.
Albedo depends on the frequency of the radiation. When quoted unqualified, it usually refers to some appropriate average across the spectrum of visible light. In general, the albedo depends on the directional distribution of incident radiation, except for Lambertian surfaces, which scatter radiation in all directions according to a cosine function and therefore have an albedo that is independent of the incident distribution. In practice, a bidirectional reflectance distribution function (BRDF) may be required to accurately characterize the scattering properties of a surface, but albedo is very useful as a first approximation.
The albedo is an important concept in climatology, astronomy, and calculating reflectivity of surfaces in LEED* sustainable-rating systems for buildings. The average overall albedo of Earth, its planetary albedo, is 30 to 35% because of cloud cover, but widely varies locally across the surface because of different geological and environmental features.
* LEED Leadership in Energy and Environmental Design.
When walls or exposed roofs (either flat or pitched) are selected then the colour (and hence reflectance values) may also be defined by clicking on the Define Colour buttons in both the Wall Details and the Ceiling Details forms. Scientifically, varying reflectance as a function of surface colour is described under the phenomenon known as albedo factor.
Parts (but not all) of this explanation were obtained from Wikipedia. All rights, if any, are acknowledged (where Wikipedia's author and contributor obtained it from is unknown).
Ambient (air) The word ambient literally means ‘all surrounding’. In the context of air, ambient air, often abbreviated to just ambient, means the air that surrounds us, including in the wider sense, the properties of that air. Generally therefore ambient air is that which is outside or external to air that might subsequently be treated or ‘conditioned’, as in air conditioning.
The basic unit of electrical current in the International System of Units (SI), equivalent to one coulomb per second, formally defined to be the constant current which if maintained in two straight parallel conductors of infinite length, of negligible circular cross section, and placed one metre apart in vacuum, would produce between these conductors a force equal to 2 × 10 -7 newton per metre of length. Abbreviations: A, amp.
The SI unit of measurement of electric current, the ampere, is named after the eminent French physicist and mathematician André-Marie Ampère and who is generally regarded as one of the main founders of the science of classical electromagnetism. Which André-Marie Ampère appropriately described as "electrodynamics".
Born Lyon, France, 1775.
Died Marseille, France, 1836.
In Physics. The absolute value of the maximum displacement from a zero value during one period of an oscillation.
In Electricity. The maximum deviation of an alternating current from its average value.
Anisotropy - directional dependence of measured properties such as thermal conductivity; the condition of a material having different properties in different directions. Examples of an anisotropic material for heat conduction are laminated materials (composed of layers with different thermal conductivity), having different thermal conductivity perpendicular and parallel to the layers.
ASHRAE (The American Society of Heating, Refrigerating and Air-Conditioning Engineers)
ASHRAE was formed as the American Society of Heating, Refrigerating and Air-Conditioning Engineers by the merger in 1959 of American Society of Heating and Air-Conditioning Engineers (ASHAE) founded in 1894 and The American Society of Refrigerating Engineers (ASRE) founded in 1904.
Atmospheric Pressure (Standard)
The standard atmosphere (symbol: atm) is a unit of pressure equal to 101325 Pa or 1013.25 millibars or hectopascals. It is equivalent to 760 mmHg (torr), 29.92 inHg, 14.696 psia, 33.94 ft of water.
An azeotrope or azeotropic mixture is a mixture of two or more liquids where its components cannot be altered simply by distillation. This is because when an azeotrope is boiled the vapour has the same proportions of constituents as the unboiled mixture.
The components of azeotropic mixtures will not separate under normal operating conditions and can be charged as a vapour or as a liquid.
For purposes of navigation, meteorology and in engineering solar azimuth is the arc of the horizon measured clockwise from the north point to the point where a vertical circle through the sun intersects the horizon. An important component in any computer or manual calculation of solar radiation heat gains upon exposed surfaces of stuctures for puposes of overall heat load calculations.
Balance Point (in refrigeration system components)
Refrigeration system component balance point is the set of temperature and pressure conditions at which two or more major component parts of a closed cycle refrigeration system share to result in a precise predicted performance.
For reasons of expediency, clarity and comparison, manufacturers of major items of 'capital equipment' for application in refrigeration systems are obliged to publish performance data for their products at what is described as 'nominal conditions'. In an ideal world all manufacturers would publish their product data at identical nominal conditions. Thus making performance, cost and value comparisons simpler for those involved in commercial and engineering decision processes. Although much has been done over recent years, particularly under pressure from government bodies concerned with fair trade practices, total harmony across the industry has not yet been achieved.
Typical nominal conditions for the published performance of a refrigeration evaporator are:-
For Standard Condition 1 (SC1) room temperature (RT and generally considered to be equal to air on coil temperature) of 10°C against refrigerant evaporating temperature (or Saturated Suction Temperature) of 0°C, giving a TD (temperature difference between the two of 10 Kelvin.
For Standard Condition 2 (SC2) room temperature (RT and generally considered to be equal to air on coil temperature) of 0°C against refrigerant evaporating temperature (or Saturated Suction Temperature) of -8°C, giving a TD (temperature difference between the two of 8 Kelvin.
For Standard Condition 3 (SC3) room temperature (RT and generally considered to be equal to air on coil temperature) of -18°C against refrigerant evaporating temperature (or Saturated Suction Temperature) of -25°C, giving a TD (temperature difference between the two of 7 Kelvin.
For Standard Condition 4 (SC4) room temperature (RT and generally considered to be equal to air on coil temperature) of -25°C against refrigerant evaporating temperature (or Saturated Suction Temperature) of -31°C, giving a TD (temperature difference between the two of 6 Kelvin.
The above standard operating conditions are convenient as they are either close or even identical to many actually required 'real life' operating conditions. Particularly SC3 which is commonly used for General Purpose Freezer rooms for example.
Notwithstanding the fact that engineers will frequently need to calculate predicted performances at conditions varying from published standard conditions, by the simple application of published 'correction factors', this still does not provide a completely accurate statement of predicted performance, as further complications of how major system components, and which can inevitably be sourced from different manufacturers, will perform when used together in the same system. This is because selection and matching of components to work together in the system can never be the same across all operating conditions.
The number of variables involved viz Required duty, peak ambient air temperature, room design temperature, desired TD and hence refrigerant evaporating temperature, refrigerant type etc., mean that whilst an evaporator might be matched ideally to a condenser or condensing unit at one set of operating conditions, inevitably it will need to be matched to a completely differently performing condenser or condensing unit at another set of operating conditions. The major complications then arises that the set of operating conditions for the optimal and commercially readily available components will affect the performance of each other so as to differ from mathematically predicted performances for each component. Thus the Balance Point needs to be determined and which will more accurately indicate predicted total system performance (duty).
At its simplest an evaporator will have a performance curve that can be plotted across a range of feasible refrigerant operating conditions. Conversely a condensing unit (condenser and compressor assembly) which might offer a suitably close performance match will also have a plotable performance curve across the same range of feasible refrigerant operating conditions. Both curves can be transferred to a graph and the point at where the performance curves for each of the components described will indicate the Balance Point performance when the two components are working together in the same system. If the two components were reasonably accurately selected and well suited in the first place then the Balance Point performance may not vary greatly from the initial nominal condition performance or adjusted nominal condition performance. However it is exceedingly rare for initial predicted performance and Balance Point performance to match exactly and for this reason the exercise should always be undertaken. Final Balance Point performances of components in the above description might result in either higher than initially predicted performance or lower
Plotting a Balance Point accurately can however be time consuming and regrettably therefore it is often neglected. Particularly by inexperienced practitioners. Whilst good computer programs have been developed to both speed the process and to improve its accuracy these should not be used as a substitute for understanding the Balance Point process and how to apply it.
A Ball Valve uses a spherical obstruction to stop and start hydraulic flow. A ball valve is usually rotated through 90° to open and close it.
The bar is a non-SI unit of pressure, defined by the IUPAC as exactly equal to 100,000 Pa. It is about equal to the atmospheric pressure on Earth at sea level, and since 1982 the IUPAC has recommended that the standard for atmospheric pressure should be harmonised to 100,000 Pa = 1 bar ˜ 750.0616827 Torr. The same definition is used in the compressor and the pneumatic tool industries (ISO 2787).
The bar and the millibar were introduced by the British meteorologist William Napier Shaw* in 1909, while he was the director of the Meteorological Office in London.
Units derived from the bar are the megabar (symbol: Mbar), kilobar (symbol: kbar), decibar (symbol: dbar), centibar (symbol: cbar), and millibar (symbol: mbar or mb). They are not SI or cgs units, but they are accepted for use with the SI. The bar is legally recognised in countries of the European Union.
Bar(g) is a unit of gauge pressure, i.e., pressure in bars above ambient or atmospheric pressure (see absolute pressure and gauge pressure).
Definition and conversion
The bar is defined using the SI unit pascal, namely: 1 bar = 100,000 Pa
1 bar is therefore equal to:-
1,000,000 dyn/cm2 (baryes)
14.5038 psi absolute
* Sir William Napier Shaw
Born Birmingham, England, 1854.
Died London, England, 1945.
A body that absorbs all radiation falling on it and emits electromagnetic waves with spectrum given by the Planck's law.
The temperature at which a fluid changes from a liquid to a gas (vapour). At atmospheric pressure water boils at 100°C (212°F).
Boyle's Law (sometimes referred to as the Boyle–Mariotte Law, or Mariotte's Law) describes how the pressure of a gas decreases as the volume of a gas increases
A modern version or paraphrase states Boyle's Law as - The absolute pressure exerted by a given mass of an ideal gas is inversely proportional to the volume it occupies if the temperature and amount of gas remain unchanged within a closed system.
Mathematically, Boyle's Law can be stated as:- PV = k, where P is the pressure of the gas, V is the volume of the gas, and k is a constant.
Thus, as volume increases, the pressure of the gas decreases in proportion. Similarly, as volume decreases, the pressure of the gas increases.
Boyle's Law was named after the English chemist and physicist Robert Boyle who first published it in 1662.
Born Lismore Castle, Ireland, 1627.
Died England, 1691.
Brazing is a process in which two or more metal items are joined together by melting and flowing a filler metal into the joint between two or more close-fitting parts by capillary action. The filler metal is brought slightly above its melting temperature while protected by a suitable atmosphere, usually a flux. It then flows over the base metal in a process called wetting and then cooled to join the workpieces together. Brazing is similar to soldering except the temperatures used to melt the filler metal are higher for brazing. Brazing differs from welding in that the process does not involve melting the metals to be joined.
BSP (British Standard Pipe [thread])
The British Standard Pipe (BSP) is a range of standard screw thread types used internationally to connect pipes by mating an external (male) with an internal (female) thread. BSP has been adopted as an international standard scale used in steel, brass, ABS (plastic) and other plastic and metal pipe fittings, except in the USA where NPT is used.
Jointing threads. Pipe threads where a pressure tight joint is made through the mating of two threads together. They always use a taper male thread, but can have either parallel or taper* female threads.
* Except for International standards where all female threads must be parallel.
Longscrew threads. Pipe threads where a pressure tight joint is made by the compression of a soft material (such as a butyle rubber O-ring seal or washer) between the end face of the male thread and a corresponding landing surface in the matching socket.
The thread form is British Standard Whitworth. Pipe sizes are described by their nominal inside diameter in inches (a legacy of the old Imperial measurement unit system and which persists for BSP). However, as manufacturing quality and consistency has improved, coupled with greater understanding and application of application pressure limits, as a cost saving exercise, pipe wall thicknesses have reduced since the original 19th century standards were introduced. Being impractical to change outside connection standards the inside diameters have subsequently been slightly increased for each given standard BSP size.
There are currently sixteen basic sizes in the range, although others have been made. These are:-
Sir Joseph Whitworth
Born Stockport, England, 1803.
Died Monte Carlo, Principality of Monaco, 1887.
British Thermal Unit
The British thermal unit (BTU or Btu) is a traditional unit of energy approximately equal to 1055 joules. It is the amount of energy needed to cool or heat one pound of water by one degree Fahrenheit. Except for the USA where it still largely persists, in science and industry the joule, the SI unit of energy, has generally replaced the BTU.
Random motion of particles in a liquid or a gas due to thermal excitation. Robert Brown, Scottish Botanist, was the first to describe this phenomenon in 1827.
Born Montrose, Scotland. 1773.
Died London, England. 1858.
The temperature at which a liquid forms bubbles (usually the lower or lowest boiling point of one of the constituents of a blend). The liquid temperature without sub-cooling.
Calorie (cal and Cal)
The word calorie was used to describe two units of energy.
The small calorie or gram calorie (symbol: cal) is the approximate amount of energy needed to raise the temperature of one gram of water by one degree Celsius.
The large calorie, kilogram calorie, dietary calorie, nutritionist's calorie, nutritional calorie or food calorie (symbol: Cal, equiv: kcal) is the amount of energy needed to raise the temperature of one kilogram of water by one degree Celsius. The large calorie is thus equal to 1000 small calories or one kilocalorie (symbol: kcal).
Although these units are part of the metric system, they now have been superseded in the International System of Units by the joule. One small calorie is approximately 4.2 joules. One large calorie or kilocalorie is therefore approximately 4.2 kilojoules.
A capillary tube or tubes are fitted at the end of refrigerant liquid lines in closed circuit, direct expansion, refrigeration systems immediately before the evaporator so as to maintain high pressure in the liquid line at the same time as facilitating a significant pressure drop as the refrigerant enters the evaporator, thereby forcing the refrigerant to evaporate and absorb heat from surrounding fluids and materials. Thus creating a cooling effect. Pressure differential through the capillary tube is a function of the tube length and relatively small diameter creating a measurable, constant resistance to refrigerant flow.
Capillary tubes are also effectively metering devices, controlling the rate of flow of refrigerant circulating through the closed circuit refrigeration system. They have a similar effect as more sophisticated expansion valves and thermostatic expansion valves but lack the advantages afforded by the latter of variable control. Capillary tubes are less expensive components for their purpose than expansion valves and are generally more suited to smaller refrigeration and cooling applications, especially where refrigeration load duties are predictably more constant. In domestic refrigerators and automotive air conditioning systems for example.
Where multiple capillary tubes are required (for multi-circuit evaporators) then these will be fitted by brazed connection to a precision made brass component called a distributor and where the capillaries are arranged symmetrically so as to ensure each tube receives and passes identical volumes of refrigerant.
Celsius temperature scale
Modern replacement of the Fahrenheit scale. The conversion is Tf = (9/5)*Tc+32 where Tc = temperature in degrees Celsius, Tf = temperature in degrees Fahrenheit.The Celsius temperature scale was named after Anders Celsius, Swedish astronomer, physicist and mathematician. Professor of astronomy at Uppsala University from 1730 to 1744. Anders Celsius proposed the Celsius temperature scale in 1742.
Born Uppsala, Sweden, 1701.
Died Uppsala, Sweden, 1744.
Centigrade temperature scale
Centigrade is essentially the same temperature scale as Celsius but with slight differences. Originally concerning itself mainly in the temperature range associated with the freezing point of pure water (0°C) and the boiling point (100°C). Hence the 'centi' component in the word (meaning 'one hundred' or parts thereof).
The centigrade scale is divided into degrees, based on dividing the temperature between which water freezes and boils, into 100 equal gradients (degrees).
The centigrade scale was introduced in 1744 and remained the primary scale of temperature until 1948. In 1948 the CGPM (Conference General des Poids et Measures) began to standardise several units of measurement, including the temperature scale. As 'grade' was already in use as a unit in its own right, the new name Celsius was chosen for the temperature scale. Thus Centigrade has largely fallen into disuse, except in meteorology.
The Celsius scale remains a centigrade scale in which there are 100 degrees from the freezing point (0°C) and boiling point (100°C) of water, though the size of the degree used in the Celsius scale is now more precisely defined. A degree Celsius (or a Kelvin) is a division of the thermodynamic range between absolute zero and the triple point of pure water into 273.16 equal parts. There is 0.01°C difference between the triple point of water and the freezing point of water at standard pressure.
Chlorofluorocarbon. Saturated hydrocarbons in which all of the hydrogen atoms in the molecule have been replaced by chlorine and fluorine atoms. CFCs are identified by a two or three digit number with each digit representing the number of particular atoms in the compound.
Reading from left to right:-
First digit = number of carbon atoms (C) - 1 (omitted if equal to zero)
Second digit = number of hydrogen atoms (H) + 1
Third digit = number of fluorine atoms (F)
All the remaining atoms are chlorine (C1)
CFM (cubic feet per minute)
CFM (cfm or cubic feet per minute) is used in measurement of volumetric flow rate in the old Imperial system of units. It is equal to 0.028317 cubic metres per minute and 1,699011 cubic metres per hour in SI units.
A Check Valve is a control valve that allows fluid to flow in one direction only. Check valves prevent fluid backflow.
The chemical potential of a thermodynamic system is the amount by which the energy of the system would change if an additional particle is introduced, with the entropy and volume held fixed. If a system contains more than one species of particle, there is a separate chemical potential associated with each species, defined as the change in energy when the number of particles of that species is increased by one. The chemical potential is particularly important when studying systems of reacting particles.
A compressor is any reciprocating or rotating mechanical device that compresses a gas. The design and configuration of which can take many forms. Some of the more commonly found varients are described below.
Centrifugal compressors use a rotating disk or impeller in a shaped housing to force gas to the rim of the impeller thus increasing the velocity of the gas. A diffuser section converts this velocity energy to pressure energy.
Centrifugal compressors are primarily used for continuous, stationary service in industry and larger applications. Typically from 100 horsepower to many thousands of horsepower. With multiple staging Centrifugal compressors can also achieve very high output pressures of 10,000 psi (69 MPa) or more.
Hermetic compressors comprise a compressor and motor enclosed in a single, hermetically sealed, welded steel casing and where the two are connected by a common shaft. Compressors can typically be of reciprocating, vane or scroll types.
Advantages over conventional (and usually larger) 'open' type compressors are compactness, ease of installation, relatively quiet operation and long service life (reliability, particularly in small applications such as domestic refrigerators and freezers). Disadvantages are that in the event of failure through wear in either of the two major components, the compressor or the electric driving motor, repair (in other than factory controlled remanufacturing conditions and where high unit production volumes normally prevail) is not usually economically viable. Despite this, in some third world countries, particularly those able to exploit cheap labour and where quality control and customer after care is poorly regarded, then some hermetic compressor repair workshops do flourish.
For purposes of this description an open compressor is any type of compressor that is neither hermetically nor semi-hermetically sealed and where it is driven by either an electric motor or other mechanical propulsion system (internal combustion engine for example) and which is connected to the compressor by means of a shaft (through or not through any reduction gearbox), belts and sheaves, chain and sprocket drive or hydraulic coupling. Unlike hermetic and semi-hermetic compressors, open compressors rely upon either natural leather or synthetic seals to retain internal pressure,
Scroll compressors are mechanical devices for compressing air or refrigerant. Scroll compressors are used in refrigeration equipment as well as for other applications such as air compressors and vacuum pumps.
Scroll compressors use two interleaved spiral-like vanes to pump or compress gases. The vane geometry may be involute, archimedean spiral, or hybrid curves. One of the scrolls is usually fixed while the other orbits eccentrically without rotating. Thus both pumping and compressing pockets of gas between the scrolls.
Due to minimal clearance volumes between the fixed scroll and the orbiting scroll, scroll compressors have very high volumetric efficiency.
Scroll compressors are known for operating more smoothly, quietly, and reliably than conventional reciprocating compressors of comparable duty.
Reciprocating compressors use pistons driven by a crankshaft to compress gases. Reciprocating compressors can be single or multi-staged and typically driven by electric motors or coupled to internal combustion engines.
Reciprocating compressors can be of the hermitic (hermetically sealed), semi-hermetic or open type.
Rotary screw compressor.
Rotary screw compressors use two meshed rotating positive-displacement helical screws to force gas into a smaller volume. Rotary screw compressors are usually used for continuous operation in commercial and industrial applications.
Rotary screw compressor applications can be from a few horsepower to over 1,200 horsepower and from low pressure to moderately high pressure (greater than 1,200 psi or 8.3 MPa).
In semi-hermetic compressors the compressor and motor driving the compressor are integrated, and operate within the pressurised gas envelope of the system. The motor is designed to operate in and be cooled by the refrigerant gas being compressed. Unlike the hermetic compressor however the motor is generally mounted to the hermetically sealed component containing the compressor through a gasketed seal and through which it drives the compressor via a shaft. The motor is thus made easily accessible for repair or replacement. Semi-hermetic compressors are used typically for medium sized applications, larger than where hermetic compressors are used but where there might be some overlap (around 15hp to 30hp). In duty by duty comparisons semi-hermetic compressors will normally be considered more robust or have a longer service life but also initially more expensive.
Vane compressors (sometimes described as Rotary Vane compressors) consist of a rotor with a number of sliding blades inserted in radial slots in the rotor. The rotor is mounted offset in a larger housing that is either circular or sometimes a more complex shape. As the rotor turns, blades slide in and out of the slots whilst maintaining contact with the outer wall of the housing. A series of decreasing volumes is therefore created by the rotating blades.
Vane compressors can be single or multi-staged and driven by either electric motors or internal combustion engines. Vane compressors are well suited to electric motor drive and are significantly quieter in operation than equivalent reciprocating piston compressors.
CO2 Critical Point and Triple Point
The Critical Point (Pc) is the condition at which liquid and gas densities are the same. Above this point distinct liquid and gas phases do not exist. There is no phase change when heat is removed from a transcritical fluid while it is above the critical pressure and temperature.
The Triple Point (Pt) is the condition at which solid, liquid and gas co-exist. Below this point there is no liquid phase. At atmospheric pressure solid CO2 sublimes directly to gas. If CO2 is at a pressure higher than the triple point and its pressure is reduced to below that of the triple point it will deposit directly to a solid.
CO2 supply cylinder pressure
The pressure in a CO2 supply cylinder is approximately 57 bar ( 5.7 MPa) at 20°C.
When CO2 is withdrawn from the cylinder through a regulator set at an outlet pressure of less than 5.2 bar gaseous CO2 is produced.
1 kg of liquid CO2 expands to approximately 550 litres of gas at atmospheric pressure.
The Coanda effect is the tendency of a jet of air or other fluid to be attracted to nearby surfaces that are parallel or approximately parallel to the jet stream. Named after the Romanian aerodynamics engineer Henri Coanda.
Henri Marie Coanda
Born Bucharest, Romania, 1886
Died Bucharest, Romania, 1972
A heat exchanger on the high pressure side of a closed cycle refrigeration system in which refrigerant condenses while rejecting heat to a cooling stream (Eg. ambient air).
The temperature at which refrigerant is condensed from a vapour to a liquid.
The quantity of heat that passes in unit time through unit area of a material or system when its opposite faces differ in temperature by one degree.
The quantity of heat transmitted, due to unit temperature gradient, in unit time under steady conditions in a direction normal to a surface of unit area, when the heat transfer is dependent only on the temperature gradient. (See also apparent or effective thermal conductivity.) Note: there are a number of qualifiers regarding this term due to the fact that heat is not transmitted by conduction processes alone.
Conservation of energy
Energy can neither be created nor destroyed, it simply changes its form. In thermal radiation terms this translates to: a + r + t = 1 where a = absorptivity, r = reflectivity, t = transmissivity.
Putting a thermometer in contact with the measured object - see also Non-contact thermometry.
Coefficient of Performance. A measure of the efficiency of a refrigeration system. The COP is defined as the ratio of the cooling duty of a mechanical refrigeration system compared to the power required to operate it. Eg. If a system has a cooling duty of 150kW and it requires 75kW of power to operate it then the COP is 2.
It is important to be aware of the difference between Cycle COP and System COP as both are frequently quoted often without due regard to clarifying the difference.
Cycle COP refers to efficiency ratio between only the compressor in the system and system performance whereas System COP includes not only the compressor but also all other power consuming components in the system such as fans and pumps etc.
The saturation pressure equivalent to the Critical Temperature.
The temperature above which gas cannot be liquefied, irrespective of pressure. Conventional refrigeration cycles can only operate efficiently using fluids well below critical temperature.
Cryogenics is the branch of physics concerned with the production and behaviour of materials at very low temperatures. Defined as temperatures below -150°C or 123 Kelvin (-238°F).
An atomic force microscope that can operate at very low temperatures of several Kelvins.
The time rate of flow of electric charge, in the direction that a positive moving charge would take and having magnitude equal to the quantity of charge per unit of time. Current is measured in amperes. Symbols: amps, A or a.
John Dalton, English meteorologist and chemist.
Born Eaglesfield, England 1766.
Died Manchester, England 1844.
Dalton's law states that in a mixture of non-reacting gases, the total pressure exerted is equal to the sum of the partial pressures of the individual component gases.
John Dalton held the view, against the opinions of his peers at the time, that the atmosphere was a mixture of approximately 80% nitrogen and 20% oxygen and not a specific compound of elements.
Dalton measured the capacity of air to absorb water vapour and the variation of its partial pressure with temperature. He defined partial pressure in terms of a physical law whereby every constituent component in a mixture of gases exerted the same pressure it would have had, had it been the only gas present. The British scientist John Frederic Daniell claimed Dalton was the Father of the science of Meteorology.
Darcy Weisbach (equation)
In fluid dynamics, the Darcy–Weisbach equation is used to calculate head loss, or pressure loss, due to friction along a given length of pipe relative to the average velocity of the fluid flow. The equation is named after Henry Darcy and Julius Weisbach.
Henry Philibert Gaspard Darcy. French engineer. Henry Darcy made several important contributions to hydraulics including the original equation used for calculating pressure loss of fluids moving in pipes. The equation was subsequently refined by German mathematician and engineer, Julius Ludwig Weisbach.
Henry Philibert Gaspard Darcy
Born Dijon, France, 1803.
Died Paris, France, 1858.
Julius Ludwig Weisbach
Born Mittelschmiedeberg, Germany 1806
Died Freiberg, Germany 1871.
For purposes of navigation, meteorology and in engineering solar declination is the angular distance of the sun from the celestial equator, measured on the great circle passing through the celestial pole and the sun. A calculation of a complete position for any place on Earth, at any time, consists of three algorithms:-
1. Coordinates of the Sun in the ecliptic coordinate system.
2. Convertion to the equatorial coordinate system.
3. Convertion to the horizontal coordinate system for the observer's local position.
An important component in any computer or manual calculation of solar radiation heat gains upon exposed surfaces of stuctures for puposes of overall heat load calculations. As for example in air conditioning heat load calculations.
Defrost system Eg 'Time-on, time-off' and 'Time-on, temperature-off'.
A system, either mechanical through use of liquid or refrigerant gas, or electrical through use of electrically heated elements, for removal of unwanted ice build-up on the surfaces of evaporators in refrigeration systems.
The defrost mechanism heats the evaporator for short periods of time to melt ice that has formed upon it and which if not removed will both impede performance and also restrict airflow in the case of evaporator fan-coil units. The resulting melt water either drains through a pipe in the base of the evaporator (drain pan) or is pumped from the unit.
Defrosting is typically controlled by an electronic timer set to provide defrosting at regular preset intervals. Excessively or uneccessarily long defrosting periods are undesirable however due to undesired introduction of heat into cooled spaces and resultant obvious cost considerations. Therefore more sophisticated defrost cycle termination switches have been developed than simple 'timer initiated termination'. Such as 'Time-on, temperature-off' and even electronic ice sensing systems utilising photo-voltaic components for example.
An electrical or electronic device for initiating and sometimes terminating defrost intervals in coldrooms and freezers. In simple systems defrost cycles may be of the 'time initiated, time terminated' type. However these can lead to wasted energy due to the dual effects of unnecessarily long defrost periods and also, for freezers, the additional burden of adding excessive amounts of heat energy (from the defrost system) into the refrigerated space. More sophisticated systems described as 'time initiated, temperature terminated' and related systems employing actual ice presence detectors (typically utilising photo-voltaic apparatus) are increasingly being used to terminate defrost periods.
A desiccant is an hygroscopic chemical or substance often used to remove excessive or unwanted moisture from an object or from a conditioned space.
De-humidification is the process whereby excess or unwanted moisture is removed from an object or a conditioned space. De-humidification can be achieved, particularly for small objects such as moisture vulnerable intricate electrical devices, by use of a chemical desiccant or de-humidification can be achieved by cooling air to below its dew point, with the result that moisture will condense and can thus be removed, then re-heating the air to a higher desired temperature and now with a subsequently lower moisture content.
Delta T and Delta TD
The difference in temperature between two different substances operating commonly in a system.
For example:- Where water enters a heat exchanger at 30°C to cool oil leaving at 50°C Delta TD is 20 Kelvin.
The difference in temperature between a substance entering a system and after heat energy has been either removed or added, subsequently leaving that system.
For example:- Where water enters a heat exchanger at 30°C to cool oil leaving at 50°C and the water leaves the heat exchanger at 40°C Delta T is 10 Kelvin.
Symbol r (Greek rho) - is a measure of mass per unit of volume. The higher an objects density, the higher its mass per volume. The average density of an object equals its total mass divided by its total volume. Bulk density is a term for density of a collection of particles (eg grains of sand) in a container, as opposed to the material density that is the density of the individual particles (eg one grain of sand).
The temperature at which a vapour will condense or, where associated with glide, the highest boiling point of a component in the mixture. Vapour temperature without any superheat.
A Diaphragm Valve is a valve that uses a flexible diaphragm, usually of rubber, synthetic rubber or plastic material, which engages with an orifice via the operation of a screw mechanism for example, to control fluid flow.
Differential pressure is the difference in pressure between two measured pressure points.
Diffusers are used in air-conditioning, heating and ventilating systems where they serve several functions:-
To evenly distribute flow of air in a desired direction.
To enhance mixing of air from various sources prior to being discharged.
To encourage air streams to adhere to a ceiling or other surface. taking advantage of the Coanda effect.
To create low velocity air movement in occupied parts of rooms where higher velocities would lead to discomfort.
To help reduce the amount of noise resulting from turbulence of air streams that are forced to rapidly change in velocity upon entering a space or room.
Diffusivity (thermal) of a substance is equal to the ratio of its thermal conductivity to its heat capacity. (See heat capacity.)
Direct Expansion (DX)
A Direct Expansion refrigeration system, commonly abbreviated to the initials DX, is a mechanical system designed to produce a cooling effect upon a fluid (typically air or water) which exploits directly the heat energy absorbed during the change of state process that results from evaporation of a liquid (refrigerant) into a vapour.
A Direct Expansion refrigeration system is commonly found in many both air condoning systems and also (primarily) domestic refrigerators, freezers and commercial sized refrigeration systems. The system comprises a closed pipe circuit connecting three principal components. These are :- An evaporator, where expansion of relatively volatile refrigerant liquid is encouraged to evaporate, in the process absorbing heat energy from air in b>direct contact with the evaporator, a compressor where following expansion the resultant refrigerant vapour is compressed, and a condenser where the relatively hot, compressed refrigerant vapour is cooled via a cooling medium stream such as ambient air or water, forcing it to condense back into a liquid refrigerant. The refrigerant circulates continuously through the closed circuit system due to the dual role of the compressor in both compressing and also effectively pumping the refrigerant around the circuit.
Alternative descriptions sometimes applied to the same system are Vapour Compression Cycle and Closed Circuit Refrigeration System.
Dry Bulb Temperature
The temperature of air as indicated by an ordinary thermometer.
Nitrogen is an inert gas. Nitrogen where moisture content has been removed to a measured dew point of -40°C (-40°F) is commercially readily available as it is produced for many industrial drying purposes and for medical use, where it is known as 'White Spot Dry Nitrogen'. Oxygen impedes the joining of non ferrous components during brazing operations and therefore Dry Nitrogen can be introduced into pipes that are to be brazed, a process known as 'purging' so as to exclude oxygen and thus aid the brazing process and also prevent the formation of potentially damaging oxides on internal surfaces of pipes. Manufacturers of fin and tube heat exchangers routinely use White Spot Dry Nitrogen purging during their production systems for both manual and automated brazing processes.
The moisture content in air can also be highly damaging to a piped closed circuit refrigeration system and therefore as much as possible of the air containing that moisture must first removed before the initial charging of the system with refrigerant. Dry Nitrogen can be used to purge pipes of air containing moisture as an alternative to use of a Vacuum Pump
Fin and Tube heat exchangers, particularly for oem (original equipment manufacturing) applications for relatively high volume assembly production lines such as for automotive air conditioning, are routinely sealed and charged prior to despatch from the heat exchanger manufacturing plant with a low positive charge of White Spot Dry Nitrogen. Thus ensuring the product remains internally free of moisture during transport and storage, regardless of varying ambient conditions. The sound or other indicator warning of nitrogen escaping from the product when the temporary seal is removed also serves to provide evidence that the product has remained gas tight between manufacture and arrival at the assembly operation.
For refrigeration and air conditioning systems, particularly those having roof mounted condensers, and that may be expected to operate from time to time at well below their peak or maximum load conditions, or where capacity control is provided by cycling compressors in multiple compressor packs, single refrigerant risers may result in suction velocities that are too low to effect proper oil return.
A double riser suction line can be installed in such situations and this typically comprises a smaller and larger riser. The smaller of the two must have sufficient section to cope with the minimum expected load and the sum of the pressure drops of the larger and smaller risers must be equal to that of the equivalent single riser that would be used to cope with the system running at full capacity. The larger riser is trapped and its utilisation controlled so as to come into use only when the system is running at full capacity. Thereby acceptable velocities for effective oil return can be achieved across the whole expected range of system capacities.
A colouring substance which can be natural or synthetic. Dye molecules absorb and emit light within a specific range of wavelengths, thus they appear to have a certain colour.
In (incompressible) fluid dynamics Dynamic Pressure is sometimes called velocity pressure. Dynamic Pressure is the quantity defined by:-
q = 1/2pv²
where (in SI units):-
q = dynamic pressure in pascals
p = fluid density in kg/m³
v = fluid velocity in m/s
EC (Electronically Commutated motors)
Electronically Commutated motors are effectively a type of brushless DC motor.
Basic DC motors rely upon carbon brushes and a commutation ring to switch the current direction, and therefore magnetic field polarity, in a rotating armature. The interaction between this internal rotor and fixed permanent magnets induces its rotation. In an EC motor, the mechanical commutation has been replaced by electronic circuitry which supplies the right amount of armature current in the right direction at precisely the right time to effect accurate motor control.
The electronics in an EC motor converts AC to DC and control motor speed by regulating power supplied to the motor. Apart from introducing fine motor speed control manufacturers claim efficiency improvements of up to 30%.
The emissivity of a surface is the ratio of the energy radiated from it to that from a blackbody at the same temperature, the same wavelength and under the same viewing conditions. The term "emissivity" has a lot of qualifiers, depending on wavelength and direction of emission or detection. For instance, "normal spectral emissivity" indicates the emissivity at a particular wavelength and in a direction normal to the surface, while "hemispherical total emissivity" indicates emissivity when radiation is emitted over all wavelengths into all of the space above a material surface. The term "emittance" is often used instead of emissivity. This is to distinguish the emissivity of a particular sample of material from the 'characteristic' value of the material when it has an optically smooth surface and is thick enough to be opaque. However, it is almost impossible to achieve the latter condition in practice and so this terminology is not universally adopted.
Emissivity of a surface of a material refers to its emitting energy as thermal radiation. Thermal radiation is electromagnetic radiation that can include both visible radiation and invisible infrared radiation. Emissivity is the ratio of the thermal radiation from a surface to the radiation from an ideal black surface at the same temperature as given by the Stefan–Boltzmann law. This ratio varies from 0 to 1. The surface of a perfect black body has an emissivity of 1 and emits thermal radiation at the rate of approximately 448 watts per square metre at room temperature 298.15K (25°C).
Surfaces of objects lose thermal energy directly to the atmosphere. They also lose energy by emitting thermal radiation and this cooling phenomenon is particularly relevant for windows. Standard glass windows have emissivities close to the maximum possible value of 1.0 whereas 'low-E glass' with transparent low emissivity coatings emit less thermal radiation than ordinary windows. Low emissivity coatings coatings can reduce window heat losses by as much as 50% compared to standard glass windows.Index
Emittance or emissivity
Emittance or emissivity of a material is the ratio of the radiant heat flux emitted by the material to that emitted by a blackbody at the same temperature and under the same viewing conditions. (See radiant heat flux.) Note: there are four qualifiers that apply, namely, directional, hemispherical, spectral and total, depending on direction and wavelength range, respectively.
Derived from or relating to experiment and observation rather than theory. Based on practical experience rather than scientific proof.
Empirical data was the original basis for all scientific research and continues to be of indespensible value today. However mid 20th century emergence of computing technology has resulted in accelerating research to obtain scientific proofs and also mathematical modelling methods where digital application of empirical data is both clumsy and impractical. Particularly for essential 'dynamic error trapping' processes without which many computer programs would be rendered all but useless. The cost of converting empircally based data into algorithms, formulae and equations thus represents a significant part of that required to develop viable computer software (programs) and which are now essential for commercial and industrial etc., efficiency.
A process that requires heat from its surroundings.
Enthalpy is a measure of the total energy of a thermodynamic system. It includes the system's internal energy, which is one of five common thermodynamic energy potentials and a state function, as well as its volume and pressure.
Entropy quantifies the degree of disorder in a closed system and the probability of a reaction taking place or not. In a closed system entropy increases until the equilibrium is reached. The thermodynamic definition of entropy reflects the fact that heat cannot be completely converted into work, as noted by Lord Kelvin: "There is no device that can transform heat withdrawn from a reservoir completely into work with no other effect".
For purposes of calculating resistance to flow of fluids in pipes, essential pipeline
components such as valves, filters, dryers etc., have published values corresponding
to their resistance to flow expressed as that of the equivalent length of pipe of the
same diameter in which they are intended to be fitted. Thus making overall pipework
design pressure drops much easier to compute. For example, a particular type of
valve, designed to be fitted in a pipe of 1/2” diameter, might be declared by its
manufacturers as having an equivalent length of 0.5 metres. Thus when fitted in a
pipe with a total length of 8 metres, after fitting the valve, the overall pipe length for
purposes of calculating its resistance to fluid flow, and thereby the total pressure drop,
would be 8.5 metres.
Ester oil is a synthetic base oil that has been chemically synthesized. Typical usage is in vehicle air conditioning compressors, refrigeration compressors and some other industrial applications. Esters are stable molecules, providing good solvency and very good low and high temperature performance.
One that gives up heat to its surroundings. Opposite of an endothermic process.
In chemistry the phenominon of an alloy or mixture whose melting point is lower than that of any other alloy or mixture of the same ingredients.
A heat exchanger in the low pressure side of a refrigeration system in which liquid refrigerant evaporates thus absorbing heat from any medium in close proximity (such as air) so as to create a cooling effect on that medium. A process described under Latent Heat or change of state.
The temperature at which refrigerant boils from a liquid to a vapour requiring it to absorb heat from its surroundings in the process. Index
Exhaust air is forced out of a space resulting from replacement air that is fed in to that space under pressure.
A mixture of substances having a lower melting point than any of its constituents.
Expansion Device (Eg. Expansion Valve)
A valve, orifice, or capillary tube installed in a refrigerant tube immediately ahead of the evaporator. Designed to create a pressure drop and thus force refrigerant liquid to evaporate to its vapour stage.
Extract air is drawn out of a space under lower pressure than air in that space. Air is fed or directed in to that space to replace it.
Fahrenheit temperature scale, still commonly used in the United States, devised by Daniel Gabriel Fahrenheit (1686-1736), Dutch-German physicist, engineer and maker of scientific instruments such as the alcohol thermometer (1709) and mercury thermometer (1714).
Daniel Gabriel Fahrenheit
Born: Gdan'sk, Poland. 1686
Died: The Hague, Netherlands. 1736
A line plotted on a chart which indicates mechanical fan (air mover) performance in terms of relationships between air volume, rotational fan speed (RPM), Static Pressure and (usually) fan power absorbed.
The design and arrangement of windows in a building or structure.
First law of thermodynamics
States that heat is energy.
In metallurgy, a flux is a chemical cleaning agent and a flowing agent (or purifying agent). Flux has more than one function in the high-temperature metal joining processes of welding, brazing and soldering. The primary purpose of flux is to prevent oxidation of the base and filler materials by creating a barrier to oxygen. Secondly flux act as a chemical cleaning agent removing existing oxides, oils and other contaminates that might impede the metal joining process.
Fourier heat equation
A partial differential equation for temperature as a function of spatial co-ordinates and time.
FPS (feet per second)
FPS (fps or feet per second) is used in measurement of velocity in the old Imperial system of units. It is equal to 0.3048 metres per second in SI units.
Typically used in measurement of air velocity either in or leaving air ducts and also for fluid flow rates in pipes.
The temperature at which a liquid becomes a solid upon removal of its latent heat content. The freezing temperature of water is 0°C (32°F) at atmospheric pressure.
An electrochemical device that produces electricity and heat from a fuel (hydrogen and oxygen) without combustion. The process is an 'inverse electrolysis'. Hydrogen and oxygen are catalytically reassociated to water. Fuel cells could power electrical cars if the problem of handling and storage of hydrogen could be solved, possibly using nanotubes.
A Gate Valve is a valve fitted in a pipe or tube having a screw operated sliding plate to control flow of fluid. Gate valves can be either manually controlled via hand wheel or lever fitted to the screw mechanism connecting the sliding plate or can be remotely controlled via stepper motors for example.
Gauge Pressure is zero-referenced against ambient air pressure, so it is equal to absolute pressure minus atmospheric pressure. Negative signs are usually omitted. To distinguish a negative pressure, the value may be appended with the word "vacuum" or the gauge may be labelled a "vacuum gauge."
A kinetically (rather than thermodynamically) conditioned temperature region below which on cooling the molecular mobility greatly decreases as a polymer changes from a rubbery to a glassy state.
A Globe Valve is a valve that adjusts the flow of a fluid between and including fully on and fully off. The globe valve consists of a circular plug that is typically operated by a screw mechanism and a tapered seat into which the tapered plug engages.
A body that has emissivity less than 1 and independent of wavelength.
Hydrocarbons such as methane in which the hydrogen atoms have been replaced by halogen atoms. Where all hydrogen atoms have been replaced the compound is described as fully halogenated. Where only some of the hydrogen atoms have been replaced the compound is described as partially halogenated.
Brominated Hydrocarbon. Halons contain bromine, chlorine, fluorine and carbon. Halons have very high ODP factors.
Halons are commonly used in fire extinguishing systems and fire extinguishers. Particularly aboard aircraft where their high efficiency to weight ratio makes Halon highly suitable. Production and import in the European Union was phased out from the beginning of 1994.
Hydrochlorofluorocarbons. CFCs which have not been fully halogenated so that one or more hydrogen atoms remain in the molecule. HCFCs are more readily decomposed in the troposphere and therefore their ODPs are less than for CFCs.
HCFC Phase-out table
The quantity of heat required to change the temperature of a body by one degree. For a homogeneous body it is the product of mass and specific heat capacity; and for an inhomogeneous body it is the sum of the product of mass and specific heat capacity of all the individual homogeneous components.
A Heat Exchanger is any mechanical device that is designed to transfer heat energy from one medium or fluid into another.
There are many types of heat exchanger and sizes can vary from the (now) minute Nanotechnological sizes to extremely large Feed Water heaters, for example in Nuclear power station applications.
Common heat exchanger designs include fin-coil, as used in evaporators and air cooled condensers, plate heat exchangers, as used for example in the dairy and food industries, shell and tube heat exchangers, as used for oil coolers, particularly in heavy industry and marine applications. Less common, or at least, less well appreciated examples of heat exchangers appear in medical and laboratory applications.
Heat exchanger technology extends from the very simple to highly complex items of sophisticated engineering production costing several millions of Pounds (Dollars). It is estimated that heat exchanger use accounts for up to 15% of all mankind's energy manipulation* on the planet and as such is a regrettably grossly misunderstood subject amongst the lay public.
Refrigeration and Air Conditioning engineering could not exist or function without Heat Exchangers. Modern civilisation could not exist or function without Refrigeration and Air Conditioning engineering.
* Energy can neither be created nor destroyed but can be changed from one state to another and can be moved from one medium (material or fluid) to another. Heat energy always moves from a warmer to a colder medium and continues to do so until temperature equilibrium is reached.
In its broadest sense a Heat Pump is any closed circuit refrigerating system designed to move heat energy from one location to another. Either to use it or expel it to another and which exploits the 'Change of State' process to gain an efficiency ratio of energy usage (required to drive the system) appreciably lower than the amount of energy that is moved.
A simple refrigerator or air conditioner is technically therefore a heat pump. However the term is generally reserved for a device that is designed to recover heat energy from a place where it is freely available, such as ambient air, to a place where it is needed, such as heating a building. Particularly in equipment where the system is reversible, meaning that the system can operate as a heating system in low ambient temperature conditions and as a cooling system in high ambient air temperature conditions
In a reversible Heat Pump, when in cooling mode the evaporator performs as an evaporator and similarly the condenser as a condenser. When reversed so as to provide heat instead of cooling then the evaporator performs as a condenser releasing system rejected heat where it is useful, and the condenser performs as the evaporator, absorbing heat from ambient air in order to effect a 'change of state' upon the refrigerant.
Heat pumps have found particular favour in countries such as Canada where despite having very low winter ambient air temperatures, a ready supply of electricity from hydro-electric power stations, coupled with large geographic distances making transport of fossil fuels untenable, has made them popular.
Heat Pumps are rapidly becoming the most economical and thus popular choice of equipment for heating water in swimming pools. Where, due to both seasonal usage reasons and a relatively high temperature differential between energy source and heat sink (the water) they are relatively efficient. Efficiency ratios of around 4.5:1* are typical in temperate climates. * I.e. For every 1kW of electrical energy consumed to operate the system, 4.5kW heat energy is gained.
A system of electrically powered heater elements laid beneath a freezer room floor and controlled by a thermostat to maintain ground in direct contact with the floor structure above the freezing temperature of the moisture it contains. In the absence of which if that ground freezes is likely to increase in volume due to the formation of ice and thus break the floor. A process known as Frost Heave.
Despite adding heat to materials in contact with the refrigerated space it is generally acknowledged that floor Heat Mat heat loads should not be added to freezer refrigeration load calculations as the load calculation should anyway be designed to consider mean ground heat content and sub-strata heat transfer coefficients and which will always be higher than heater mat loads. Thus representing a 'worst case' situation for load calculation purposes.
In tropical climates, where there is no risk of seasonal air frosts, ducts through which ambient air is forced are sometimes used in place of electrical heater mats so as to serve the same purpose and as a more economical to operate system.
Jan Baptista van Helmont
Jan Baptista van Helmont
Born Brussels, Belgium 1580.
Died Vilvoorde, Belgium 1644.
Flemish scientist, doctor, naturalist and chemist.
Discovered through controlled experiment that plants absorbed Carbon Dioxide in order to grow.
The standard unit of frequency in the International System of Units (SI), equal to one cycle per second. Abbreviation: Hz
Example: Alternating electrical current is supplied to domestic consumers in Europe and some other regions of the world at a frequency of 50 Hz. Meaning alternation at 50 cycles per second.
Partially halogenated hydrocarbons containing only fluorine, hydrogen and carbon. HFCs have zero ozone depleting potential.
High Pressure Switch (HP Switch)
A high pressure switch (HP Switch) is connected to the compressor discharge line to protect the high-pressure side of the system against excessive pressure.
The design of the HP Switch is similar to that of the LP Switch. However, whereas the LP Switch is made to close when the suction pressure reaches an upper set limit the HP Switch is made to open when the discharge pressure is too high.
The HP Switch is therefore a safety device only and does not control the compressor under normal operating conditions.
The HP Switch and LP Switch are frequently combined into a single manufactured unit (HP/LP Switch).
Is a material in which the relevant physical properties are uniform throughout the material.
Horse Power (HP)
A unit of power equal to 33,000 foot pounds of work per minute. One electrical horsepower is equal to 746 watts. Horsepower is commonly abbreviated to the initials HP.
A mechanical device used for the introduction of additional moisture into a conditioned space. Humidifiers can take various forms, such as Spinning Disc, where water is effectively vapourised and projected into a space or air duct through Coriolis force (frequently mis-named centrifugal force) from the edges of a disc rotating at high speed, or steam humidifiers or atomizers.
Organic substances which contain only hydrogen and carbon.
Hygroscopic materials or substances are those that have a tendancy to absorb water vapour from the atmosphere.
Oils that are commonly added to refrigerants can be hygroscopic.
Imperial (units of measurement)
The system of imperial units or the imperial system (also known as British Imperial) is the system of units first defined in the British Weights and Measures Act of 1824, which was later refined and reduced. The system came into official use across the British Empire. By the late 20th century, most nations of the former empire had officially adopted the metric system as their main system of measurement. However some Imperial units are still used in the United Kingdom and Canada.
The United States of America still adheres to an Imperial based system of measurement units. Despite the country being early national signatories to the late 19th century initiative that has ultimately led to almost universal adoption of SI.
Inches of Water (Water gauge)
Inches of water is a non-SI unit for pressure. It was used for measuring small pressure differences across an orifice, or in a pipeline or duct. Inches of water can be converted to a pressure unit using a formula for pressure head.
It is the pressure exerted by a column of water of 1 inch in height at defined conditions. For example 1"wg is approximately equal to 249 pascals at the defined conditions of standard atmospheric pressure at sea level at 4°C.
A system consisting of a lens transparent to the infrared radiation, a detector and associated electronics giving the user an image of energy in the infrared spectrum.
A part of the electromagnetic adjacent to visible light. Approximately from 0.7µm to microwave.
Infrared thermal region
The portion of the infrared spectrum that the majority of heat energy is recorded from. This portion of the electromagnetic spectrum is defined as 3µm to microwave. However, most of infrared imaging occurs between 3µm and 14µm.
Born Breda, Netherlands 1730.
Died Bowood House, England 1799.
Dutch physiologist, biologist and chemist.
Known for discovering photosynthesis is the process by which green plants absorb carbon dioxide.
Insolation (also Irradiation)
Insolation (an anagram composed of incident or incoming solar radiation) is a measure of solar radiation energy received on a given surface and recorded during a given time. It is also called solar irradiation and expressed as "hourly irradiation" if recorded during an hour or "daily irradiation" if recorded during a day. Insolation is generally measure in megajoules per square metre (MJ/m²) or joules per square millimetre (J/mm²).
An important component in any computer or manual calculation of solar radiation heat gains upon exposed surfaces of stuctures for puposes of overall heat load calculations. As for example in air conditioning heat load calculations.
A material (depending upon type for intended application) that reduces or prevents the transmission of heat or sound or electricity.
IOR (Institute of Refrigeration)
The Institute was founded in England in 1899 as the Cold Storage and Ice Association and was the first national society of mechanical refrigeration in the world. In 1944 qualified membership was introduced in order to raise the status of the association and of those engaged in the science and practice of refrigeration, and the present name of the Institute of Refrigeration was adopted.
The IOR is registered with the Charity Commission of the United Kingdom as an educational and scientific body (reg no 250 081). It is governed by an elected Council of Members who act as Charity Trustees.
The relationship between two or more compounds, radicals, or ions that are composed of the same kinds and numbers of atoms but differ from each other in structural arrangement (structural isomerism) as with CH 3 OCH 3 and CH 3 CH 2 OH for example.
One in which the propagation of heat (or electric current or electromagnetic waves) does not depend on direction of propagation.
James Prescott Joule.
Born Salford, England, 1818.
Died Sale, England, 1889.
Joule the SI unit for energy. The joule (J), named in honour of James Prescott Joule and his experiments on the mechanical equivalent of heat. In fundamental terms, 1 Joule is equal to 1 Newton-metre.
K factor (Thermal conductivity)
Not to be confused with K when used as the symbol for Kelvin (see separate description - Kelvin)
In physics, thermal conductivity (often denoted k or K) is the property of a material to conduct heat. It is evaluated primarily in terms of Fourier's Law* for heat conduction.
* Named after the French Mathematician and Physicist Jean Baptiste Joseph Fourier.
Heat transfer occurs at a higher rate across materials of high thermal conductivity than across materials of low thermal conductivity. Correspondingly materials of high thermal conductivity are widely used in heat sink applications and materials of low thermal conductivity are used as thermal insulation. Thermal conductivity of materials is temperature dependent. The reciprocal of thermal conductivity is called thermal resistivity.
In SI units, thermal conductivity is measured in Watts per metre Kelvin (W/(m K))
In Imperial units, thermal conductivity is measured in Btu per hour per foot Rankine (Btu hr/ft R)
1 Btu hr/ft R = 1.730735 W/(m K)K factor is the essential component used in the equation including material thickness and necessary for calculating U value. Needed to calculate the rate at which heat energy passes through a given material, always from a higher temperature source or region to a lower temperature region*. As for example when energy in ambient air at a relatively higher temperature passes through construction materials and insulation into a closed space that has been designed to be held at a lower temperature.
For 75mm thickness Polyurethane Foam insulation.
*A common misconception, particularly amongst the inadequately educated, is that insulation 'keeps the cold out'. A scientific nonsense as 'cold' is a word used merely to describe the absence (or to be more precise, the relatively lower amount when compared to another region) of heat energy. Cold is therefore not a property which can be 'kept out'!
Jean Baptiste Joseph Fourier
Born Auxerre, France. 1768
Died Paris, France. 1830
William Thomson Lord Kelvin.
Born Belfast, Ireland, 1824.
Died Largs, Scotland, 1907.
The Kelvin is a unit of measurement for temperature. One of the seven base units in the International System of Units (SI). The Kelvin is assigned the unit symbol K. The Kelvin scale is an absolute, thermodynamic temperature scale using as its null point Absolute Zero, the temperature at which all thermal motion ceases in the basic description of thermodynamics.
from Kelvin to Kelvin Celsius [°C] = [K] - 273.15 [K] = [°C] + 273.15 Fahrenheit [°F] = [K] X 9/5 - 459.67 [K] = ([°F] + 459.67) × 5/9 Rankine [°R] = [K] X 9/5 [K] = [°R] X 5/9
Kinetic energy of an object is the energy which it possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity. Having gained this energy during its acceleration, the body maintains this kinetic energy unless its velocity changes. The same amount of work is done by the body in decelerating from its current velocity to a state of rest.
Kinetic energy is the energy of motion of a body, equal to the work it would do if it were brought to rest. The translational kinetic energy depends on motion through space, and for a rigid body of constant mass is equal to the product of half the mass times the square of the speed. The rotational kinetic energy depends on rotation about an axis, and for a body of constant moment of inertia is equal to the product of half the moment of inertia times the square of the angular velocity. In relativistic physics kinetic energy is equal to the product of the increase of mass caused by motion times the square of the speed of light. The SI unit is the joule but the electronvolt is often used in atomic physics.
William Thomson Lord Kelvin was credited with introducing the word Kinetic to describe this physical phenomenon.
Kirchhoff's law (a = e, where a = absorptivity and e = emissivity).
Gustav Robert Kirchhoff
Born: Königsberg, Kingdom of Prussia (present-day Russia). 1824
Died: Berlin, Prussia, German Empire (present-day Germany). 1887
Laminar Flow and Turbulent Flow
Laminar flow describes the movement of a fluid through a pipe or duct where the direction of the major part of the fluid is parallel to the wall surfaces of the pipe or duct. At higher velocities, friction between the moving fluid and the surface material of the pipe or duct causes drag and thus slowing of the fluid closest to the wall. The remaining fluid, further away from that effected by drag subsequently creates eddies and currents described as turbulent flow and which add to the overall resistance to flow through the pipe or duct. Problems of turbulent flow are usually exacerbated in the proximity of bends and take-offs (Tees) in the pipe or duct. The unwelcome additional pressure drop resulting from turbulent flow can sometimes be mitigated in air ducts for example by the installation of air turning vanes, which separate air flow into multiple channels and also encourage more orderly flow which more closely resembles the characteristics of laminar flow.
Latent heat is the energy released or absorbed by a body or a thermodynamic system during a constant-temperature process. A typical example is a change of state of matter, meaning a phase transition such as the melting of ice or the boiling of water. The term was introduced around 1762 by Scottish chemist Joseph Black. It is derived from the Latin latere (to lie hidden). Black used the term in the context of calorimetry when referring to the heat transferred that caused a change of volume while the thermodynamic system was held at constant temperature.
In contrast to latent heat, an energy is called a sensible energy or heat when it causes processes that do result in a change of the temperature of the system.
Born Bordeaux, France. 1728 (nationality Scottish).
Died Edinburgh, Scotland. 1799.
A liquid receiver is commonly used in refrigeration systems that uses a thermostatic expansion valve as a metering device.
The main purpose of a liquid receiver is to temporarily store excess refrigerant in its liquid state that is not required when load conditions are low. Thermostatic expansion valves need a constant supply of refrigerant in its liquid form at all times and the liquid receivers ensures that supply.
Low Pressure Switch (LP Switch)
The low pressure switch (LP Switch) is also known as a Suction Pressure Control Switch. The LP Switch is the control normally used to switch, typically via a relay, operation of refrigeration compressor and thus the complete system.
The LP Switch is connected to the suction side of the compressor and is activated by pressure changes in the suction line.
The LP Switch and HP Switch are frequently combined into a single manufactured unit (HP/LP Switch).
The temperature at which a solid changes into a liquid. The melting point depends on pressure (Clausius-Clapeyron law).
Meteorology is the science dealing with the atmosphere and its phenomena, including climate and weather.
Comprehensive local meteorological data is fundamental to the accurate calculation of both refrigeration and air conditioning heat loads.
mole (SI unit of measurement)
mole (unit) – SI unit of amount of a substance (symbol: mol) is the base unit of the amount of a substance in the International System of Units (SI). It is defined as exactly 6.02214076×1023 particles, which may be atoms, molecules, ions, or electrons.
The definition of mole was adopted in November 2018 as one of the seven SI base units, revising the previous definition that specified one mole as the amount of substance in 12 grams of carbon-12 (12C), an isotope of carbon.
Mollier Diagram (or Enthalpy–Entropy chart)
An enthalpy–entropy chart which plots total heat against entropy. Describing the enthalpy of a thermodynamic system. Property data for the Mollier diagram is identical to that on a psychrometric chart. However the arrangement of data on the two chart types is fundamentally different.
Named after Richard Mollier, German Physicist.
Born Triest, Germany, 1863.
Died Dresden, Germany, 1935.
A prefix meaning one billionth (1/1,000,000,000).
Is the creation of materials, devices, and systems on the nanoscale (up to 100 nm) through the manipulation of individual atoms and molecules.
Tubelike molecules of carbon (diameter about 10,000 times smaller than a human hair) consisting of graphite sheets, being extremely strong materials with high thermal conductivity. Nanotubes can be single walled or multiwalled (composed of one or several sheets in a concentric formation). Nanotubes may have no 'temperature'.
A Needle Valve is a valve that adjusts the flow of a fluid between and including fully on and fully off. The needle valve consists of a sharp conical obstruction that is extended or retracted, usually via a screw mechanism, to obstruct or allow flow. Needle valves are typically used in applications that demand fine control over flow, such as for metering additions of one fluid to another for example.
Sir Isaac Newton.
Born 1643, Woolsthorpe-by-Colsterworth, England.
Died 1727, Kensington, England
The newton (symbol: N) is the International System of Units (SI) derived unit of force. It is named after Sir Isaac Newton following his work on mechanics, specifically Newton's second law of motion.
Newton Unit system SI derived unit Unit of Force Symbol N In SI base units 1 N = 1 kg·m/s²
Where the following symbols are used: -
1 newton metre = 0.737562149277 foot pounds
Measuring temperature of a body without touching it (for example measuring the temperature of the sun by a pyrometer).
The ohm (symbol:) is the SI derived unit of electrical resistance, named after German physicist Georg Simon Ohm.
The ohm is defined as a resistance between two points of a conductor when a constant potential difference of 1.0 volt, applied to these points, produces in the conductor a current of 1.0 ampere, the conductor not being the seat of any electromotive force.
V = volt
A = ampere
m = metre
kg = kilogram
s = second
C = coulomb
J = joule
S = siemens
F = farad
W = watt
Georg Simon Ohm
Born Erlangen, Germany, 1789.
Died Munich, Germany, 1854.
Caused by passing electric current through a resistor (e.g. an electric heater).
Ozone Depletion Potential (ODP)
The ozone depletion potential (commonly abbreviated to intials ODP) of a chemical compound is the relative amount of degradation to the ozone layer it can cause, with trichlorofluoromethane (R11) being fixed at an ODP reference level of 1.0. In comparison for example Chlorodifluoromethane (R22) has an ODP of 0.055.
R11 has the maximum potential amongst chlorocarbons because of the presence of three chlorine atoms in its molecule.
ODP was first proposed in 1983. It was defined as a measure of the destructive effects of a substance compared to the reference substance.
The ODP of a substance is defined as the ratio of global loss of ozone compared to the global loss of ozone due to R11 of the same mass.
Discovery of ozone depletion in the stratosphere with its resultant reduced ability to limit passing of potentially hazardous Ultra-Violet (UVA) radiation to the planet's surface led directly to the formation in 1987 of a United Nation's treaty called the Montreal Protocol and which came into force in 1989. The Montreal Protocol called for the ultimate phase out of production and effective banning of all Chlorofluorocarbons (CFCs) including Hydrochlorofluorocarbons (HCFCs), by 2030. The Montreal Protocol was the first treaty in history to be universally ratified by all member states of the United Nations.
Pallet Standard Sizes
ISO Pallets SI Inches Notes 1016 × 1219 40.00 × 48.00 (20 pallets in 40 ft ISO) North America 1000 × 1200 39.37 × 47.24 Europe, Asia. (Similar to 40" × 48") 1165 × 1165 45.9 × 45.9 Australia 1067 × 1067 42.00 × 42.00 North America, Europe, Asia 1100 × 1100 43.30 × 43.30 Asia 800 × 1200 31.50 × 47.24 Europe EU Pallets EUR 1 SI Inches Notes 800 × 1200 × 145 31.50 × 47.24 × 5.71 ISO1 same size as EUR 1. safe load: 2490 kg. EUR 2 SI Inches Notes 1200 × 1000 × 144 47.24 × 39.37 × 5.67 ISO2 same size as EUR 2. Safe load: 1470 kg. EUR 3 SI Inches Notes 1000 × 1200 × 144 39.37 × 47.24 × 5.67 Safe load: 1920 kg. North American Pallets SI Inches Notes 1016 × 1219 40 × 48 Grocery, many other uses 1067 × 1067 42 × 42 Telecommunications, Paint 1219 × 1219 48 × 48 Drums 1219 × 1016 48 × 40 Military, Cement 1219 × 1067 48 × 42 Chemical, Beverages 1016 × 1016 40 × 40 Dairy 1219 × 1143 48 × 45 Automotive 1118 × 1118 44 × 44 Drums, Chemicals 914 × 914 36 × 36 Beverages 1219 × 914 48 × 36 Beverages, Shingles, Packaged Paper 1219 × 508 48 × 20 Retail
The pascal (symbol: Pa) is the SI unit of pressure. Named after the French mathematician, physicist and philosopher Blaise Pascal. It is a measure of force per unit area. Defined as one newton per square metre.
1 Pa = 1 N/m²
N = Newton
m² = metre squared
The older and now internationally virtually obsolete* unit commonly used for defining pressure was pound per square inch (psi).
* Except in the USA.
1 psi = 6.8948×10³ Pa
Common multiple units of the pascal are:-
hectopascal (1 hPa = 100 Pa).
kilopascal (1 kPa = 1000 Pa).
megapascal (1 MPa = 1,000,000 Pa).
Born Clermont-Ferrand, France, 1623.
Died Paris, France, 1662.
Usually a cooling element utilising the Peltier effect, used to cool or refrigerate small objects.
Jean Charles Peltier (1785–1845)
A change in temperature at the junction of two different metals or semiconductors produced when an electric current flows through them. The extent of the change depends on what the conductors are and the nature of change (rise or fall in temperature) depends on the direction of current flow. It is the reverse of the Seebeck effect. It is named after the French physicist Jean Charles Peltier (1785–1845) who discovered it in 1834.
A representation of the regions and boundaries of existence of various phases of a physico-chemical system depending on one or more thermodynamic quantities, such as temperature, pressure or concentration.
Planck's radiation law
Was formulated in 1900 by Max Planck, a German physicist, to explain the spectral-energy distribution of radiation emitted by a blackbody.
Max Karl Ernst Ludwig Planck
Born: Kiel, Duchy of Holstein, 1858.
Died: Göttingen, Lower Saxony, Germany, 1947.
Platinum resistance thermometer
A thermometer with a sensor made of a thin layer of platinum based material whose resistance increases with temperature. See also - resistance thermometer.
A plenum is a space, or chamber, frequently fabricated from sheet metal but also can be made as part of a building structure, designed to receive air returning through connected ducts that has been extracted or exhausted from heated or conditioned spaces via return air registers (grilles) or has the reverse role and is designed to be pressurized to serve connecting ducts transferring heated or conditioned air to individual spaces or supply air grilles. The final connection of the plenum would generally be to an air handling unit, usually in close proximity.
Pressure Relief Valve
A Pressure Relief Valve is a (usually) non-adjustable control valve that regulates pressure in any pressurised fluid pipe system. Applications include safety valves designed to protect equipment from the damaging effects of uncontrolled excessive pressure. Which, in extreme cases could otherwise result in hazardous explosions.
Pressure Relief Valve - Freezer Room
A Pressure Relief Valve is an essential item of equipment fitted through the wall of a freezer room to balance air pressure between inside the room and outside. Following lowering of interior air pressure resulting from the reduction in volume of warm infiltration air due to reduction in temperature. Without pressure relief valves of the correct size and quantity relative to the room volume a partial vacuum can result inside. Leading to a catastrophic implosion or collapse of the complete structure. Freezer room Pressure Relief Valves (PRV) involve moving parts which can be susceptable to jamming through high concentrations of frost build up. They are therefore generally electrically heated and thermostatically temperature controlled.
Recommended number and size of freezer room PRV (Pressure Relief Valves) Room m³ cm² Room ft³ in² PRV 100 30 3550 5 1 200 60 7050 9 2 400 90 14100 14 3 750 120 26500 19 4 1500 150 53000 23 5 3000 180 106000 28 6 6000 210 212000 33 7 12500 300 441500 46 10 25000 450 883000 70 15 50000 750 1765500 115 25 100000 1200 3531000 185 40
Born Birstall, England 1733.
Died Pennsylvania, USA 1804.
English chemist, philosopher, theologian and politician. Credited with the discovery of oxygen.
A chart showing the relationship between temperature, pressure and moisture content of air or other specifically named gases.
A Pycnometer is a simple container, usually made of glass, used for finding the relative density of a liquid by measuring its net weight when filled with the liquid and comparing it with the net weight when filled with pure water at its maximum density (that is when the pure water is at a temperature of 4°C).
Instrument for detecting temperature using infrared radiation.
The speed at which a sprayed liquid or solid particle cools upon striking a cold surface.
Radiant heat flux
The rate of radiant energy emitted from unit area of a surface in all directions into the hemisphere of space above the surface.
William John Macquorn Rankine
Born Edinburgh, Scotland, 1820
Died Glasgow, Scotland, 1872.
Rankine is a thermodynamic (absolute) temperature scale named after the Glasgow University engineer and physicist William John Macquorn Rankine, who proposed it in 1859.
The symbol for degrees Rankine is °R. Zero Rankine is Absolute Zero. The Rankine degree is defined as equal to one degree Fahrenheit. A temperature of -459.67°F is exactly equal to 0°R.
from Rankine to Rankine Celsius [°C] = ([°R] - 491.67) X 5/9 [°R] = ([°C] + 273.15) X 9/5 Fahrenheit [°F] = [°R] - 459.67 [°R] = [°F] + 459.67 Kelvin [K] = [°R] X 5/9 [°R] = [K] X 9/5
Now an obsolete temperature scale created by R A F de Réaumur (1683-1757) a French scientist. He used the freezing point of water as his zero mark, and put the boiling point at 80 degrees.
The ratio of reflected power to incident power, expressed in decibels or percentage.
The terms reflectivity and reflectance are often used interchangeably, although there is a difference between the two terms. Reflectance is a measurement of the amount of light that is reflected by a coating at a given film thickness. Reflectivity is the maximum amount of light that can be reflected by the coating; no further increase in coating film thickness or smoothness will increase the value.
A chemical substance used in a mechanical refrigeration system to absorb heat in an evaporator by change of state from a liquid to a gas, and to release that heat in a condenser as the substance returns from its gaseous state back to its liquid state.
Refrigeration may be defined as lowering the temperature of an enclosed space by removing heat from that space and transferring it elsewhere. Typically removing heat from an enclosed and thermally insulated space, such as a coldroom or freezer room, along with heat from items placed in that space, to ambient air.
In coldstore (coldroom) design the sum of structural, product (typically food product) and miscellaneous heat loads such as from personnel, lighting and machinery etc., are known as the Primary Refrigeration Load.
However the time available over a 24 hour period for the refrigeration system to meet the Primary Refrigeration Load duty is less then 24 hours. This is because a time period has to be set aside for removal of ice build up from cooler surfaces. A process known as defrosting. Defrost time periods are determined with consideration for a number of factors. These include design operating temperatures, TD (temperature differences between design operating temperature and refrigerant evaporating temperature, expected humidity ratios in the refrigerated space and which itself may be a function of the type of product to be stored. However typical defrost periods, in temperate climates at least are generally set at around 8 hours in a 24 hour period for 'off-cycle' defrost systems as usually designed for relatively higher temperature storage applicable for chillers and coldrooms, and 6 hours in any 24 hour period for powered defrost systems designed for freezers which operate at lower temperatures. The addition of the essential time periods for defrost is frequently described as Running Load.
For powered defrost systems, where either relatively warmer refrigerant gas is directed through tubes in evaporators to remove ice or in electric defrost systems where electrically powered heater elements are used for the same purpose, it is generally considered that there is no need to include the heat created by these systems as this is added to the ice melt water and which is always routed away to outside of the refrigerated space. This is not entirely factual however as inevitably some heat will be added to the refrigerated space but empirical observations have determined that in a properly designed and controlled powered defrost system, the amounts of additional heat energy involved are not worthy of consideration.
Therefore the simple expedient of multiplying Primary Refrigeration Load by a factor of 24 over 16 for chillers and coldrooms and a factor of 24 over 18 for freezers is generally applied to arrive at what is described as the Preliminary Refrigeration Load.
Finally, where fan-coil units fitted with electrically powered fan motors are used and which is the most common form of cooling equipment fitted inside coldrooms and freezer rooms, consideration must be given to adding the heat generated by the cooler fan motors themselves. This can add as much as circa 5% of the Preliminary Refrigeration Load and it is important not to ignore it. The sum of Preliminary Refrigeration Load and Cooler Fan Load is the Total Refrigeration Load and it is that duty which the refrigeration system has to meet before other considerations such as work heat from compressors for example are also added. The addition of which to the Total refrigeration Load becomes the Total Heat of Rejection and which is what the condensers in the system are required to reject to either ambient air or some other cooling medium outside the refrigerated space.
However, manufacturers' fan coil unit design can vary considerably in efficiency and therefore the final actual figure might not be known until after suitable coolers have been provisionally selected. If, once cooler fan load additions are known, the resultant net duty of the coolers is reduced by much more than 5% of Total Refrigeration Load then the provisional cooler selection should be abandoned and a slightly larger cooler selection made. Although this might initially appear to be a seemingly trivial consideration by the time further system inefficiencies resulting from unfavourable
The ratio of the amount of water vapour present in air compared to the greatest possible amount at the same temperature.
A device, usually consisting of an electromagnet and an armature, by which a change of current or voltage in one circuit is used to make or break a connection in another circuit or to affect the operation of other devices in the same or another circuit. Relays are typically used for indirect switching of electrical loads in circuits where direct switching would impose loads too high for that part of the circuit or of another circuit to sustain.
A sensing element the resistivity of which changes with temperature. The sensing element can be a conductor (RTD) or a semiconductor (thermistor).
Respiration (of fruit and vegetables)
Both fresh fruit and fresh vegetables are live products and they continue to respire after harvesting at varying rates depending upon species, condition (ripeness) and storage temperature. During respiration fructose combines in an exothermic reaction with oxygen to produce carbon dioxide and water. Heat, described as heat of respiration, is released during the reaction and this adds energy to the refrigeration load of fruit and vegetable chilled storage rooms.
In fluid mechanics, the Reynolds number (Symbol Re) is a dimensionless[*] quantity that is used to help predict similar flow patterns in different fluid flow situations.
The concept was introduced by George Gabriel Stokes in 1851 but the Reynolds number is named after Osborne Reynolds (1842–1912) who popularised its use in 1883.
Sir George Stokes
Born Skreen, County Sligo, Ireland 1819.
Died Cambridge, England, 1903.
The Reynolds number is defined as the ratio of inertial forces to viscous forces and consequently quantifies the relative importance of these two types of forces for given flow conditions.
[*] A dimensionless quantity (or quantity of dimension 1) is a quantity without an associated physical dimension. It is thus a "pure" number and as such always has a dimension of 1. Dimensionless quantities are widely used in mathematics, physics, engineering, economics, and in everyday life (such as in counting). Numerous examples of dimensionless quantities exist, such as(Pi). By contrast, non-dimensionless quantities are measured in units of length, area, time, volume etc.
Born Belfast, Ireland, 1842.
RPM is the standard abbreviation for Revolutions per Minute, used to define the rotational speed of machinery such as motors, compressors and fans.
In refrigeration, coldstores (coldrooms) and freezers utilise evaporators (fan coil units or unit coolers) to extract heat energy from the refrigerated space. The process of cooling air inside the refrigerated space results in air temperature falling to its dew point with the result that water forms on external surfaces of the cooler. Where refrigerant evaporating temperaures are below 0°C this water freezes to form what is called frost. Frost impedes the efficiency of the cooler and also obstructs air flow in fan-coil units and thus must be periodically removed in a process described as defrosting. The time periods set aside are scheduled, usually by means of an electronic clock and the sum total of these timed periods is known as the Running Load.
Saturated vapour pressure
Evaporation in a closed container will proceed until there are as many molecules returning to the liquid as there are escaping. At this point the vapour is saturated and the pressure of that vapour is the saturated vapour pressure. Since the molecular kinetic energy increases with temperature, more molecules can escape the surface and the saturated vapour pressure increases. If the liquid is open to the air then the vapour pressure is a partial pressure contributing to the total pressure along with the other gases in the air. The temperature at which the vapour pressure is equal to the atmospheric pressure is the boiling point.
Scanning thermal microscope
An atomic force microscope with an integrated sensor to detect local variations in the thermal conductivity.
Second law of thermodynamics
States that not all heat energy can be recovered from a body (Lord Kelvin's formulation). An alternative formulation (E. Clausius) is that heat can flow from a colder body to a warmer body only at the expenditure of extra non-thermal energy (as in a mechanical refrigerator).
The second law of thermodynamics states that entropy always increases with time.
Thomas Seebeck (1770–1831)
Generation of a voltage in a circuit containing two different metals, or semiconductors, by keeping the junctions between them at different temperatures. Discovered by the German physicist Thomas Seebeck (1770–1831), it is also called the thermoelectric effect, and is the basis of the thermocouple. It is the opposite of the Peltier effect (in which current flow causes a temperature difference between the junctions of different metals).
Sensible heat is heat exchanged by a body or thermodynamic system that has as its sole effect a change of temperature.
The term is used in contrast to a latent heat, which is the amount of heat exchanged that is hidden, meaning it occurs without change of temperature. For example, during a phase change such as the melting of ice, the temperature of the system containing the ice and the liquid is constant until all ice has melted.
The sensible heat of a thermodynamic process may be calculated as the product of the body's mass (m) with its specific heat capacity (c) and the change in temperature (Delta T).
Sensible Heat Ratio (SHR)
Sensible Heat Ratio - SHR is defined as the sensible heat or cooling load divided by the total heat or cooling load.
The Sensible Heat Ratio can be expressed as:-
SHR = qs/qt
qs = sensible heat kW (Btu/hr)
qt = total heat - sensible heat and latent heat kW (Btu/hr)
SHR can also be modified to:-
SHR = cp (to-ti)/(ho-hi)
cp = specific heat capacity of air kJ/kg°C (Btu/lb°F)
to = outlet temperature °C (°F)
ti = inlet temperature °C (°F)
ho = outlet enthalpy kJ/kg (Btu/lb)
hi = inlet enthalpy kJ/kg (Btu/lb)
SI (le Système international d'unités)
The International System of Units (abbreviated SI from French: le Système international d'unités) is the metric system and world's most widely used system of measurement. It is used in both everyday commerce and science almost universally throughout the modern world. With the notable exception however of the USA and which still adheres to the now largely obsolete Imperial system
SI comprises a coherent system of units of measurement built around seven base units, plus twenty two named and an indeterminate number of unnamed coherent derived units. Along with a set of prefixes that act as decimal-based multipliers.
The seven SI base units are:-
candela (luminous intensity)
mole (amount of substance)
ampere (electric current)
The second of time, Kelvin and kilogram are defined independently of any other base units. The metre is defined in terms of the speed of light, so depends upon the definition of the second. The definitions of the other base units are more complicated.
The weight of a liquid compared to water* and which is assigned the index value of 1.
In science the relationship of mass to volume is usually expressed directly in terms of the density of a substance (mass per unit volume). In industry specific gravity finds wider application.
* Pure water at its densest, which is at a temperature of 4°C (39.2°F).
The Specific Gravity of pure alcohol at 25°C (ethanol, as found in alcoholic beverages) is 0.787. Therefore less dense (lower mass) than pure water.
The Specific Gravity of typical seawater, having a salinity of 3.5% and also containing other dissolved substances, is about 1.025 at 25°C. Therefore more dense (higher mass) than pure water.
An instrument especially designed for the purpose of accurately determining the Specific Gravity of a liquid is a vessel called a Pycnometer.
Sight glasses effectively provide a small 'window' allowing visual inspection of part of a closed cycle refrigerant pipe system. Sight glasses are commonly also fitted with a chemically coated component (disc around the glass periphery) that is designed to change colour to indicate the presence of unwanted and potentially damaging moisture in the system.
In theory sight glasses can be fitted at any desired location in the liquid line. However, placing a sight glass close to the expansion valve is advisable.
A standard sight glass with an indicator has a dual function. It monitors whether the moisture content of the refrigerant is within an acceptable range and it also indicates whether liquid refrigerant is always present at the expansion component.
If moisture content is within acceptable limits a colour indicator colour (commonly green) shows that no further action is necessary.
If the indicator colour changes (commonly to yellow) then this shows a problem with excess moisture content in the system.
Excessive moisture content can cause icing of the expansion valve if the evaporating temperature is 0 °C or lower. In addition, excessive moisture in the system can react with the oil normally used in modern refrigeration systems (polyester oil) to form acids.
Frothing in sight glasses indicates either a shortage of refrigerant or that refrigerant in the liquid line is not entirely in the liquid state.
Soldering is a process in which two or more metal items are joined together by melting and flowing a filler metal (solder) into the joint. The solder having a lower melting point than the metals to be joined. Soldering differs from welding in that the process does not involve melting the metals to be joined. In brazing the filler metal melts at a higher temperature than for soldering but again the metals to be joined do not melt.
A Solenoid comprises a coil of wire, partially surrounding an iron core, that is made to move laterally inside the coil by a magnetic field created by passing an electrical current through the coil of wire. Solenoids are used to convert electrical to mechanical energy. For indirect operation of switches for example and where direct operation would impose electrical loads too high for the switching circuit to sustain. Solenoids are also used for simple mechanical activation of equipment such as (relatively small) valves controlling liquid flow or for dampers in air ducts and where mechanical loads are not sufficiently high as to warrent application of more expensive or complicated motor driven systems.
Specific Enthalpy is the total energy in a system due to pressure and temperature per unit of mass in that system.
Specific enthalpy is used in thermodynamic equations when one wants to know the energy for a given single unit mass of a substance.
The SI units for specific enthalpy are kJ/kg (kilojoules per kilogram). The Imperial units for specific enthalpy are Btu/lb (British thermal units per Pound).
Specific Entropy is the entropy of a substance per unit mass (as per gram or per mole)
The SI units for specific entropy are joule/kg K (joule per kilogram Kelvin), more commonly kilojoule/kg K (kilojoule per kilogram Kelvin). The Imperial units for specific entropy are Btu/Pound °R (British thermal unit per Pound Rankine).
Entropy is a thermodynamic quantity representing the unavailability of a system's thermal energy for conversion into mechanical work, often interpreted as the degree of disorder or randomness in the system.
The second law of thermodynamics states that entropy always increases with time.
Specific Heat is the amount of heat required to change a unit mass of a substance by one degree in temperature. The heat supplied to a unit of mass is expressed as:-
dQ = m c dt
dQ = heat supplied (kJ, Btu)
m = unit mass (kg, lb)
c = specific heat (kJ/kg°C, kJ/kgK, Btu/lb°F)
dt = temperature change (K, °C, °F, °R)
1 Btu/lb°F = 4186.8 J/kgK = 1 kcal/kg°C
The volume per unit of mass of a substance.
The standard SI unit is the metre cubed per kilogram (m³/kg). The standard Imperial unit is the cubic foot per pound (ft³/lb).
Static Pressure is the expression used to distinguish pressure of a fluid from its total and dynamic pressures. The actual pressure of the fluid, which is associated not with its motion but with its state.
Static Pressure is used for example to refer to pressure at a nominated depth in a fluid.
Static pressure is usually measured in Pascals using the SI symbol Ps
In heat transfer, the condition in which the temperature at any given point in a material or material system is independent of time, to a given precision for a specified time period.
Stefan-Boltzmann equation determines radiation emitted over all wavelengths at a particular temperature.
Stefan-Boltzmann Law. Formula
All bodies radiate energy W depending on temperature T, according to the Stefan-Boltzmann law W = ε σT4 where emissivity ε is equal to 1 for black bodies and less than 1 for grey bodies, σ being the Stefan constant. The energy density for a given wavelength is given by Planck's law.Index
A stepper motor is a brushless DC (direct current) electric motor that divides its full rotation into a number of defined steps. The motor can be energised to move and hold its position at any one of these steps. Typical applications include remote control of a valve across a range of opening settings and where control is initiated by a temperature sensing device and then transmitted to the stepper motor via relays for example. A stepper motor might be used in applications where a simpler and generally smalled solenoid operated control system might be insufficiently powerful or too simplistic. Solenoids being better suited to either 'all on' or 'all off' ('fully open' or 'fully closed') operating functions.
The region of the earth’s atmosphere extending from the top of the troposphere (a height of about 10km) to about 50km. The stratosphere is characterised by the presence of relatively high concentrations of ozone.
The cooling of liquid below the temperature at which it condenses from its gaseous state.
The tube that carries refrigerant gas from the evaporator to the compressor in a closed circuit refrigeration system.
Suction Line Accumulator
A suction-line accumulator is a safety device used on a refrigeration system to prevent liquid refrigerant from returning to the compressor. A suction-line accumulator typically takes the form of a cylindrical, sealed, pressure vessel, fabricated from welded sheet steel.
The temperature of a vapour above the boiling temperature of its liquid state at the same pressure.
The measurement, using a system of equally incremental degrees, of the effect of a given quantity of heat energy present in a given mass of a material or substance. Temperature for an identical amount of energy in two or more compared materials or substances of identical mass may vary depending upon the Specific Heat property of each the materials or substances.
Typical measurement systems:-
In the International System of Units (SI)
Kelvin. Range 0 with 0 at the point at which no heat energy is present in the classical sense, to infinity.
Degrees Celsius (°C). Range -273.15°C [approx.] = 0 Kelvin, to infinity.
Degrees Centigrade (°C). As Celsius although now largely obsolete except in Meteorology.
Rankine. Range 0 with 0 at the point at which no heat energy is present in the classical sense. to infinity.
Degrees Fahrenheit (°F). Range -459.67°F at the point at which no heat energy is present in the classical sense, to infinity.
Temperature glide is the temperature difference that occurs between the vapour state and liquid state during evaporation or condensation at constant pressure. Meaning the temperature in the evaporator and condenser is not constant. Temperature glide occurs in near-azeotropic and zeotropic mixtures.
Temperature glide is the temperature difference between the bubble point and dew point temperatures.
TEWI was the jargon anagram devised in the late 20th century meaning Total Equivalent Warming Impact. Proponents of TEWI, who believed that causes for possible Global Warming were anthropological (due to human industrial and lifestyle activity), aimed to measure and then control all of the potential heat emissions, along with all theoretically potentially environmentally damaging gases, emanating not just from the manufacture and use of modern equipment essential to civilisation and even to human survival (such as refrigeration), but also to include the effects of its manufacture as well. Taken to its logical conclusion this could also be taken to include even the power consumed by the machinery involved in excavation and transporting the ore used to manufacture the metals from which the equipment was actually manufactured. Then to dismantle, transport, smelt, recover and remanufacture useful materials at the end of the equipment’s normal working life span. However proponents of TEWI probably had not given much thought in advance about the impossible extent of their postulations and thus the infinitely escalating complexity of the subject. Even extensive and expensive to develop computer modelling turned out to be hopelessly inaccurate and thus meaningless. The amount of time wasted in devotion to it, to say nothing of that wasted by others expected to observe it, gradually saw interest in TEWI wane for all but hardened and typically ‘culture of envy’ motivated theoretical ‘environmentalists’.
The quantity of heat equivalent to 100,000 British Thermal Units (Btu). Equal to 105,506 kilojoules.
Is the property of a material describing its ability to conduct heat. Its unit of measurement is Wm-1K-1 because thermal conductivity is numerically equal to thermal flux density (Wm-2) through an isothermal surface caused by a unit temperature gradient (Km-1).
Is a combination of properties (thermal conductivity, heat capacity and density) that indicates how rapidly heat is conducted in a material. Its unit of measurement is m2s-1.
Temperature dependent resistor.
A Thermocouple is a device that consists of the junction of two dissimilar metallic conductors, as copper and iron, in which an electromotive force is induced when the conductors are maintained at different temperatures, the force being related to the temperature difference: used to determine the temperature of a third substance by connecting it to the junction of the metals and measuring the electromotive force produced.
An instrument for measuring temperature of a body or a medium. A thermometer consists of a sensor (temperature sensing element) and a readout instrument i.e. a display device and connecting leads. The principle is that some property of the sensor changes with the temperature. The range of techniques is extensive: the expansion of a liquid, the change of gas pressure, the change of electrical quantity (resistance, voltage), the radiation change, etc. The temperature measurement may be done by contact with the medium or non-contact.
Thermostatic Expansion Valve
Thermostatic expansion valves (typically abbreviated to TEV, TXV, or TX valve) are metering devices that control the amount of refrigerant flow into an evaporator. Thus controlling amount of superheat at the outlet of the evaporator and thereby enhancing system efficiency.
Flow control, or metering of the refrigerant, is accomplished by use of a temperature sensing bulb fitted to the suction line close to the point where the suction line is connected to the evaporator. The bulb is filled with a gas, having similar properties to that as used in the system, that causes the valve to open against spring pressure in the valve body as the temperature of the bulb increases. As suction line temperature decreases this causes the spring to act upon the valve to close it.
Third law of thermodynamics
Postulates that it is impossible to cool a body to absolute zero by any finite process. Although one can approach absolute zero as closely as one desires, one cannot reach it. Walter Nernst formulated this law also known as the Nernst heat theorem.
Walther Hermann Nernst. German physical chemist and physicist known for his theories behind the calculation of chemical affinity as embodied in the third law of thermodynamics for which he won the 1920 Nobel Prize in chemistry. Walther Nernst helped establish the modern field of physical chemistry and contributed to electrochemistry, thermodynamics, solid state chemistry and photochemistry. He is also known for developing the Nernst equation.
Walther Hermann Nernst
Born Briesen, West Prussia, 1864.
Died Zibelle, Lusatia, Germany 1941.
A Thyristor is a semiconductor device having two stable states. Thyristors are used in electrical circuits as electronic switches to control relays.
A Ton of Refrigeration (commonly abbreviated as TR) is a unit of power used in some countries (especially in North America) to describe the heat extraction capacity of refrigeration and air conditioning equipment. It is defined as the latent heat absorbed by melting a short ton* of pure ice at 0°C (32°F) in 24 hours. It is equivalent to a mechanical system that consumes (or melts) one short ton of ice per day. The term originated during the transition from stored natural ice to mechanical refrigeration at the end of the 19th century.
A Refrigeration Ton is approximately equivalent to 12,000 Btu per hour or 3,517 Watts.
* Short ton = 2,000 pounds (907.18474 kg)
The total steady-state heat flow from (or to) a body to (or from) its surroundings by conduction, convection and radiation and is expressed as the time rate of heat flow per unit area of the body surface per unit temperature difference between the body and its surroundings.
Triple Point of Water (TPW)
Triple point of water (TPW) - The single combination of pressure and temperature at which water, ice, and water vapour can coexist in a stable equilibrium occurs at exactly 273.16 Kelvins (0.01 °C) and a pressure of 611.73 pascals (ca. 6 millibars). At that point, it is possible to change all of the substance to ice, water, or steam by making infinitesimally small changes in pressure and temperature.
The temperature and pressure at which three phases (gas, liquid, and solid) of a substance may coexist in thermodynamic equilibrium.
Turning vanes are aerodynamic devices installed inside air ducts at unavoidably abrupt changes of direction, where large radius bends are impractical due to space limitations, to help minimise turbulence and thus reduce resistance to air flow.
Universal Gas Constant
R = 8.3144 J K-1 mol-1. The universal gas constant is the constant R appearing in the ideal gas law pV=nRT, where p is pressure, V is volume, n is number of moles of gas and T is absolute temperature. The universal gas constant is defined in terms of Boltzmann's constant k as R=kNA where NA is Avogadro's number.
A quantity in building construction quantifying the insulating properties of walls, windows and other structures. The reciprocal of the U-value is the thermal resistance or R-Value. The lower the U-value number, the greater the heat transfer resistance (insulating) characteristics of the material or assembly of materials. Low U-values (down to 0.1 Wm-2°C-1) are achievable using special insulating materials and techniques.
A mechanical device for removing as far as is possible air in a closed system. The moisture content in air can be highly damaging to a piped closed circuit refrigeration system and therefore as much as possible of the air containing that moisture must first removed before the initial charging of the system with refrigerant.
Van't Hoff's law
All equilibria between two different states of matter (systems) are displaced by a lowering of temperature toward that of the two systems whose formation develops the heat.
Evaporation in a closed container will proceed until there are as many molecules returning to the liquid as there are escaping. At this point the vapour is saturated and the pressure of that vapour is the saturated vapour pressure. Since the molecular kinetic energy increases with temperature, more molecules can escape the surface and the saturated vapour pressure increases. If the liquid is open to the air then the vapour pressure is a partial pressure contributing to the total pressure along with the other gases in the air. The temperature at which the vapour pressure is equal to the atmospheric pressure is the boiling point.
VAV (Variable Air Volume)
A central air conditioning system which works on the principle of supplying constant temperature air volume to a space and by varying the air volume controls room temperature.
Viscosity is a fluid's resistance to flow. As temperature increases fluid viscosity (normally) decreases.
If fluid viscosity is very high, as with pitch for example then the fluid can even appear to be a solid. A liquid whose viscosity is less than that for water is known as a mobile liquid, while a substance with a viscosity substantially greater than water is called a viscous liquid.
A unit for the measurement of dynamic viscosity of fluids is the poise (P). Named after French physicist Jean Léonard Marie Poiseuille. The poise is more commonly expressed as centipoise (cP). Water at 20 °C has a viscosity of 1.0020 cP.
In lay terms. The more resistant to flow then the 'thicker' a liquid is, the higher viscosity it has, and correspondingly therefore a higher cP value.
To put this into context, some examples:-
R404A at -20°C 0.2299 cP
R404A at 20°C 0.1335 cP
R404A at 40°C 0.1006 cP
Water at 20°C 1.0020 cP
Kerosene 10 cP
Ethylene Glycol 15 cP
Oil (SAE 10) 50 cP
Oil (SAE 30) 150-200 cP
Oil (SAE 40) 250-500 cP
Oil (SAE 60) 1,000-2,000 cP
Honey 2,000-3,000 cP
1 cP (Centipoise) = 1 mPa.s (Millipascal Second)
Jean Léonard Marie Poiseuille
Born Paris, 1797.
Died Paris, 1869.
The standard unit of potential difference and electromotive force in the International System of Units (SI), formally defined to be the difference of electric potential between two points of a conductor carrying a constant current of one ampere, when the power dissipated between these points is equal to one watt. Abbreviation: V
Named after Alessandro Giuseppe Antonio Anastasio Volta, eminent Italian physicist and professor, Alessandro Giuseppe Antonio Anastasio Volta (Alessandro Volta).
Born Milan, Italy, 1745.
Died Como, Italy, 1827.
VRF (Variable Refrigerant Flow)
A direct expansion, central air conditioning system providing both heating and cooling. Operating on the principle of varying the flow of refrigerant to a room terminal unit so as to achieve required room temperature.
Molecular formula H2O
Molar mass 18.01528(33) g/mol
Melting point 0.00 °C (273.15K)
Boiling point 99.98 °C (373.13K)
specific gas constant 461.5 J/(kg·K)
Heat of vaporization 2.27 MJ/kg
Heat capacity at 300 K 1.864 kJ/(kg·K)
Born Greenock, Scotland, 1736.
Died Handsworth, England, 1819.
The Watt (symbol:W) is a derived unit of power in the International System of Units (SI), named after the Scottish engineer James Watt. The unit, defined as one Joule per second, measures the rate of energy conversion or transfer.
Watt second is a unit of energy equal to 1 Joule. One Kilowatt hour = 3,600,000 watt seconds.
The standard unit of power in the International System of Units (SI), equivalent to one joule per second and equal to the power in a circuit in which a current of one ampere flows across a potential difference of one volt.
Abbreviations: W, w.
Watts = Amperes (a) x Volts (v)
1 Watt = 3.142 Btu/hour (approx).
1 kilowatt = 1.34 horsepower (approx).
1 kilowatt = 3,412 Btu/hour (approx).
Welding is a process for permanently joining materials, usually metals or thermoplastics, by causing coalescence (fusing together). This is often done by melting the workpieces in the vicinity of the intended joint and adding a filler material to form a pool of molten material (weld pool) that cools to become a strong joint (weld). Welding is unlike either soldering or brazing of metals both of which involve melting a lower melting point material between the workpieces to form a bond between them but without melting the work pieces.
Wet Bulb Thermometer
An instrument used for the measurement of relative humidity in air. Evaporation of moisture surrounding the bulb of the thermometer lowers the temperature indicated compared to that indicated by a dry bulb temperature mounted or deployed in the same space.
States that the ratio of the thermal conductivity to the electrical conductivity of a metal is proportional to the temperature. This is because heat and electrical transport both involve free electrons in the metal. The thermal conductivity increases with the average particle velocity since that increases the transport of energy. However, the electrical conductivity decreases with increasing electron velocity because the collisions hinder the electrons from transport of charge. This means that the ratio of thermal to electrical conductivity depends upon the average velocity squared, which is proportional to the kinetic temperature.
Wien's displacement equation
Wien's displacement equation (Lmax T = Constant; determines the wavelength Lmax of peak radiation intensity of a blackbody at temperature T).
Slang expression, possibly originating in the USA, used to describe small, self contained air conditioning units that are typically installed in window openings in buildings. An inexpensive and quick solution to providing a simple air cooling system of around 2kW or 3kW sensible cooling duty. So named because of a propensity of the design to create local referred vibration in adjacent surfaces and materials, especially when badly installed. Increasingly now becoming banned by local government departments with responsibilities for maintaining both visually aesthetic and safe* environments for the communities they serve. *'Window rattlers' also have a dubious reputation for falling out and killing or injuring pedestrians passing below!
A zeotrope is a mixture made up of two or more refrigerants with different boiling points. Zeotropic mixtures are similar to near-azeotropic mixtures with the exception of having a temperature glide greater than 5.5°C. Zeotropic mixtures should be charged in the liquid state.
Zeroth law of thermodynamics
Law of thermodynamics states that if two systems are at the same time in thermal equilibrium with a third system, they are in thermal equilibrium with each other.
Mistral series of refrigeration and A/C load calculation programs are successors to earlier and highly popular DOS based computer programs and were researched between the years 1984 to 2021 by staff at Mistral Associates. They were developed by a team led by Richard Hosking BSc(Hons) Program Development Manager and under the direction of Chris Smith MCIM MInstR Managing Director. Programs are based upon proven calculation methods, including established factors, constants and algorithms in the public domain.
All Mistral computer programs are designed in accordance with good practice rules for the industry. Calculation processes may consider any number of parameters including (but not limited to) refrigerant mass flow, temperatures, pressures, viscosity, pipe surface roughness factors, refrigerant turbulent and laminar flow characteristics, acceptable noise levels, safe oil return, efficient compressor operation, system penalties and other system efficiency losses, heat transfer coefficients, thermal properties, plus additional, corroborated, empirical and meteorological data in order to arrive at accurate results.
As with all Mistral computer programs for Professionals in the Refrigeration and Air Conditioning
industry these programs have been subjected to rigorous testing and quality checks at key
commercial and educational establishments around the world. Mistral takes care to
ensure that any data contained by its programs either fall within the domain of public
ownership or where this is not the case then all legitimate rights have been respected and
royalties duly paid.
© Mistral programs are copyright property of Mistral Associates 1984-2021 All rights reserved. https://www.mistralassociates.com
No part of the programs, their code, unique processes or graphical images may be copied or reproduced in any form, whether electronic, printed or by any other means, without the prior express written permission of Mistral Associates, except for reproduction of printable program calculation and capital equipment selection results and associated images as clearly intended to be a programmed function and user benefit of use of the programs.